When professional contractors need dependable equipment for hot epoxy grouting, choosing the right pumping system is essential. The Blastcrete D3522 Attachment provides a practical solution for contractors who already have a hydraulic power unit and need a reliable Hydraulic Squeeze Pump for epoxy pumping applications.
Designed for straightforward operation and maintenance, the D3522 combines hydraulic power with a 2-inch squeeze-pump system. The result is a versatile Hydraulic Epoxy Pump capable of variable-speed pumping from 0 to 6 cubic yards per hour and delivering up to 400 PSI pumping pressure.
What Is a Hydraulic Squeeze Pump?
A Hydraulic Squeeze Pump is a pumping system powered by hydraulic energy and designed to move material through a flexible pumping tube. The squeeze-pump design provides an important advantage for epoxy and grouting applications because the material does not need to pass through conventional moving mechanical components.
The D3522 Attachment uses a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox. This straightforward design is intended to provide reliable pumping performance while keeping operation and maintenance relatively simple.
Blastcrete D3522 as a Hydraulic Epoxy Pump
The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors who already own hydraulic power units. Rather than requiring a separate dedicated power source, the attachment can be coupled to a suitable hydraulic power system.
As a Hydraulic Epoxy Pump, the D3522 provides variable-speed pumping between 0 and 6 cubic yards per hour. This gives contractors the ability to adjust material output according to project requirements.
The system can also deliver up to 400 PSI pumping pressure, providing the pressure capability required for many professional epoxy grouting applications.
Key Benefits of the D3522 Hydraulic Squeeze Pump
1. Simple 2-Inch Squeeze Pump
The D3522 features a 2-inch Hydraulic Squeeze Pump powered by a heavy-duty planetary gearbox. Its straightforward configuration is designed to simplify operation and routine maintenance.
2. Variable Pumping Speed
The D3522 Attachment provides an output range of 0–6 cubic yards per hour. Variable-speed pumping allows operators to control material flow based on the requirements of the job.
3. Up to 400 PSI Pumping Pressure
The Hydraulic Epoxy Pump delivers up to 400 PSI pumping pressure, making it suitable for demanding professional hot epoxy grouting work.
4. Designed for Existing Hydraulic Power Units
The D3522 is specifically intended for contractors who already have hydraulic power equipment. Connecting the attachment to an appropriate hydraulic power unit provides the energy required to operate the pump.
The specified hydraulic requirement is 10 GPM at 3,000 PSI.
5. Reduced Wear on Moving Components
One of the notable design characteristics of the D3522 is that epoxy material does not come into contact with the moving parts of the pump.
This can help reduce material-related wear on internal moving components and contributes to the pump's long service life.
6. Durable Pumping Tubes
The D3522 is equipped with long-lasting pumping tubes designed for demanding professional pumping environments.
Hydraulic Epoxy Pump Applications
The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors and can be considered for a range of professional applications where hydraulic epoxy pumping is required.
Potential applications include:
Hot epoxy grouting
Industrial epoxy grouting
Concrete repair
Structural grouting
Heavy-duty epoxy pumping
Industrial maintenance
Professional grouting projects
Hydraulic-powered material pumping
Contractors should evaluate material compatibility and application requirements before selecting pumping equipment for a specific project.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Why Choose a Hydraulic Squeeze Pump?
A Hydraulic Squeeze Pump can be an effective choice when contractors require controlled material pumping combined with hydraulic power. The D3522's squeeze-pump design separates the epoxy material from the pump's moving mechanical components.
For contractors already equipped with hydraulic power units, the D3522 Attachment provides a way to add hydraulic epoxy pumping capability without requiring a separate dedicated power system.
The variable-speed output also gives operators flexibility when different pumping rates are required on the jobsite.
Cost-Effective Pumping Equipment for Contractors
The D3522 Hydraulic Epoxy Pump is designed with simplicity and operating cost in mind. Its basic squeeze-pump configuration, hydraulic drive, and durable pumping tubes make it a practical option for professional contractors.
Because the D3522 Attachment can utilize an existing hydraulic power unit, contractors who already have compatible hydraulic equipment may be able to expand their epoxy pumping capabilities without purchasing a complete standalone pumping system.
Compact and Practical Design
The D3522 Attachment measures 76 inches in length, 37 inches in width, and 39 inches in height. Its hopper charging height is 28 inches.
These dimensions provide a compact footprint while maintaining the pumping capability required for professional hot epoxy grouting applications.
Get a Quote for the D3522 Attachment
If you are looking for a Hydraulic Epoxy Pump or Hydraulic Squeeze Pump for professional hot epoxy grouting, the Blastcrete D3522 Attachment provides a hydraulic-powered solution designed for contractors with existing hydraulic power units.
The D3522 offers:
0–6 cubic yards per hour variable-speed output
Up to 400 PSI pumping pressure
2-inch Hydraulic Squeeze Pump
Heavy-duty planetary gearbox
10 GPM hydraulic oil requirement at 3,000 PSI
Long-lasting pumping tubes
No epoxy contact with moving pump components
Simple operation and maintenance
For product pricing and additional information, visit the Quote Now page or download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment combines a simple Hydraulic Squeeze Pump design with hydraulic-powered operation for professional hot epoxy grouting applications. With variable-speed pumping from 0–6 cubic yards per hour and pressure capability of up to 400 PSI, it provides contractors with a flexible pumping solution.
For contractors who already own a compatible hydraulic power unit, the D3522 can provide an efficient way to add Hydraulic Epoxy Pump capability to their equipment fleet. Its durable pumping tubes, heavy-duty planetary gearbox, and design that keeps epoxy away from moving pump components further support its suitability for demanding grouting work.
Hydraulic Squeeze Pump for Hot Epoxy Grouting: Blastcrete D3522 Attachment
