Hot epoxy grouting projects require pumping equipment that can provide controlled material flow, reliable pressure, and dependable operation. The Blastcrete D3522 Attachment is designed as an Epoxy Grouting Pump solution for contractors who already have a suitable hydraulic power unit.
By connecting the D3522 Attachment to a hydraulic power source, contractors can achieve variable-speed pumping from 0 to 6 cubic yards per hour with pumping pressure of up to 400 PSI. Its simple design makes the equipment suitable for professional hot epoxy grouting applications where ease of operation and maintenance are important.
What Is an Epoxy Grouting Pump?
An Epoxy Grouting Pump is specialized equipment used to transfer and pump epoxy grout materials for professional construction, repair, and industrial applications. The pump must be capable of handling the characteristics of the material while providing consistent and controllable output.
The D3522 Attachment uses a 2-inch hydraulic squeeze-pump design driven by a heavy-duty planetary gearbox. This configuration provides a straightforward approach to epoxy pumping and is designed to keep epoxy material away from the pump's moving components.
Hot Epoxy Grout Pump for Professional Contractors
The Hot Epoxy Grout Pump capability of the D3522 makes it a useful solution for contractors involved in hot epoxy grouting. The unit is specifically intended for contractors who already own hydraulic power units.
Instead of purchasing a complete standalone pumping system, the contractor can couple the D3522 Attachment to a compatible hydraulic power source. The hydraulic system then provides the power required to operate the pump.
The D3522 offers an output range of 0–6 cubic yards per hour, allowing operators to adjust pumping speed according to the requirements of the application.
Why the D3522 Attachment Is Suitable for Epoxy Grouting
The design of an epoxy pump can have a significant effect on maintenance and equipment life. The Blastcrete D3522 Attachment is designed so that epoxy material does not come into contact with the moving parts of the pump.
This design characteristic can help minimize material-related wear on moving components and supports the long service life of the equipment.
The D3522 also incorporates durable pumping tubes designed for extended use in demanding pumping environments.
Key Features of the D3522 Epoxy Grouting Pump
2-Inch Hydraulic Squeeze Pump
The D3522 uses a 2-inch Hydraulic Squeeze Pump powered by a heavy-duty planetary gearbox. The squeeze-pump configuration provides a simple pumping mechanism for professional epoxy grouting work.
Variable-Speed Pumping
The Epoxy Grouting Pump provides variable-speed output from 0 to 6 cubic yards per hour. This gives operators the flexibility to control material flow based on the job requirements.
Up to 400 PSI Pumping Pressure
The Hot Epoxy Grout Pump can deliver up to 400 PSI pumping pressure, providing the pressure capability required for many demanding professional applications.
Hydraulic Power Operation
The D3522 Attachment is designed to be coupled to a hydraulic power unit. The specified hydraulic oil requirement is 10 GPM at 3,000 PSI.
This makes the D3522 particularly useful for contractors who already have compatible hydraulic equipment.
Long-Lasting Pumping Tubes
Durable pumping tubes are an important part of the D3522 design. They are intended to provide extended service in demanding pumping environments.
Simple Maintenance
The D3522 focuses on a straightforward design intended to make operation and maintenance easier. Because the epoxy material does not contact the moving pump components, contractors can benefit from a design that helps protect those components from direct material exposure.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Applications for a Hot Epoxy Grout Pump
The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors and can be considered for professional applications where controlled epoxy pumping is required.
Potential applications include:
Hot epoxy grouting
Industrial epoxy grouting
Concrete repair
Structural repair and grouting
Industrial maintenance
Heavy-duty epoxy pumping
Professional construction grouting
Hydraulic-powered epoxy pumping
The specific suitability of the pump should be evaluated based on the epoxy material, pumping requirements, and conditions of each project.
Advantages for Contractors With Hydraulic Power Units
One of the major advantages of the D3522 Attachment is its compatibility with an existing hydraulic power unit.
Contractors who already have suitable hydraulic equipment can use the attachment to add epoxy pumping capability to their existing equipment fleet. This can provide a practical alternative to purchasing a complete standalone pumping system.
The D3522's hydraulic operation, variable-speed output, and compact design make it a useful option for contractors looking for a dedicated Epoxy Grouting Pump.
Compact Equipment Design
The D3522 Attachment has a length of 76 inches, a width of 37 inches, and a height of 39 inches. Its hopper charging height is 28 inches.
The equipment dimensions provide a practical footprint for professional jobsite operations while maintaining the pumping capacity needed for hot epoxy grouting.
Choose the D3522 Attachment for Hot Epoxy Grouting
Selecting the right Hot Epoxy Grout Pump can help contractors achieve controlled and consistent pumping performance. The Blastcrete D3522 combines a hydraulic squeeze-pump system with variable-speed operation and up to 400 PSI pumping pressure.
Its design is particularly relevant for contractors who already own hydraulic power units and need a dedicated epoxy pumping attachment.
The D3522 provides:
0–6 cubic yards per hour variable-speed pumping
Up to 400 PSI pumping pressure
2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
10 GPM hydraulic oil requirement at 3,000 PSI
Long-lasting pumping tubes
No epoxy contact with moving pump components
Straightforward operation and maintenance
Request Information About the D3522 Attachment
If your company is looking for an Epoxy Grouting Pump for hot epoxy applications, the Blastcrete D3522 Attachment provides a hydraulic-powered option designed for professional contractors.
For pricing or additional product information, visit the Quote Now page.
You can also download the D3522-A brochure for additional product information and specifications.
Conclusion
The Blastcrete D3522 Attachment is designed to provide professional contractors with a practical Epoxy Grouting Pump for hot epoxy grouting applications. Its hydraulic squeeze-pump design, variable-speed output of 0–6 cubic yards per hour, and pressure capability of up to 400 PSI provide useful pumping performance for demanding projects.
For contractors who already own a compatible hydraulic power unit, the D3522 offers a straightforward way to add Hot Epoxy Grout Pump capability to their equipment. Its durable pumping tubes and design that keeps epoxy material away from moving pump components further support its use in professional grouting applications.
D3522 Attachment: Epoxy Grouting Pump for Hot Epoxy Grout Applications
