Professional contractors working with hot epoxy materials need dependable Epoxy Pumping Equipment that can provide controlled material flow, consistent pressure, and straightforward maintenance. The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors who already have a suitable hydraulic power unit.
The D3522 combines a 2-inch hydraulic squeeze-pump system with a heavy-duty planetary gearbox. When connected to an appropriate hydraulic power source, the D3522 Attachment provides variable-speed pumping from 0 to 6 cubic yards per hour and can deliver up to 400 PSI pumping pressure.
What Is an Epoxy Injection Pump?
An Epoxy Injection Pump is pumping equipment used to transfer epoxy-based materials in professional repair, grouting, and construction applications. Depending on the application and material, epoxy pumping systems may be designed for different flow rates and pressure requirements.
The Blastcrete D3522 Attachment is specifically designed as a hydraulic squeeze-pump solution for hot epoxy grouting contractors. Its squeeze-pump configuration is intended to provide a simple pumping method while keeping epoxy material away from the moving components of the pump.
This design can be particularly beneficial when equipment durability and straightforward maintenance are important considerations.
D3522 Attachment as Epoxy Pumping Equipment
The D3522 Attachment is designed for contractors who already own hydraulic power units. Instead of requiring a separate dedicated power source, the attachment can be coupled to a compatible hydraulic power system.
Once connected, the hydraulic power drives the pump through its heavy-duty planetary gearbox. The operator can use the variable-speed capability to control pumping output between 0 and 6 cubic yards per hour.
The system can also deliver up to 400 PSI pumping pressure, providing substantial pumping capability for professional hot epoxy grouting applications.
Key Features of the D3522 Attachment
2-Inch Hydraulic Squeeze Pump
At the center of the D3522 system is a 2-inch Hydraulic Squeeze Pump. The pump is driven by a heavy-duty planetary gearbox and is designed for professional epoxy pumping applications.
The simple configuration helps make the equipment straightforward to operate and maintain.
Variable-Speed Pumping
The Epoxy Pumping Equipment provides an output range of 0–6 cubic yards per hour. Variable-speed pumping allows contractors to control the rate of material delivery according to project requirements.
Up to 400 PSI Pumping Pressure
The D3522 Attachment can deliver up to 400 PSI pumping pressure. This provides contractors with the pressure capability needed for demanding professional hot epoxy grouting work.
Hydraulic-Powered Operation
The D3522 is designed to connect to an existing hydraulic power unit. Its specified hydraulic requirement is:
10 GPM at 3,000 PSI
This makes the attachment particularly useful for contractors who already have suitable hydraulic equipment available.
Epoxy Does Not Contact Moving Pump Components
A significant design characteristic of the D3522 is that epoxy material does not come into contact with the moving parts of the pump.
Keeping the material separated from moving mechanical components can help reduce material-related exposure and contribute to long equipment service life.
Long-Lasting Pumping Tubes
The D3522 incorporates durable pumping tubes designed for extended use in demanding pumping environments.
Epoxy Pumping Equipment for Hot Grouting
Hot epoxy grouting requires equipment capable of handling the demands of professional pumping operations. The D3522 Attachment is designed specifically with hot epoxy grouting contractors in mind.
Its hydraulic squeeze-pump configuration provides a controlled pumping method, while the variable-speed output gives operators flexibility during different stages of a project.
For contractors who already have hydraulic power equipment, the D3522 provides a practical way to add dedicated epoxy pumping capability to their equipment fleet.
Applications of the D3522 Attachment
The Blastcrete D3522 Attachment is intended primarily for hot epoxy grouting applications. Depending on the project requirements and material specifications, potential applications can include:
Hot epoxy grouting
Industrial epoxy grouting
Concrete repair
Structural grouting
Industrial maintenance
Heavy-duty epoxy pumping
Professional construction grouting
Hydraulic-powered material pumping
Contractors should verify material compatibility and application requirements before using any pumping equipment for a specific epoxy or grouting project.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Advantages of Using the D3522 for Epoxy Pumping
Uses an Existing Hydraulic Power Unit
The D3522 Attachment is designed for contractors who already own hydraulic power units. This can provide a practical way to add epoxy pumping capabilities without purchasing an entirely separate power system.
Controlled Material Output
With a pumping range of 0–6 cubic yards per hour, operators have the ability to adjust the output according to the requirements of the job.
Simple Pumping Design
The hydraulic squeeze-pump configuration is designed with simplicity in mind. This can help contractors operate and maintain the equipment more easily.
Reduced Exposure of Moving Components
Because the epoxy material does not contact the moving parts of the pump, the design helps separate the material from important mechanical components.
Durable Construction
The combination of a heavy-duty planetary gearbox and long-lasting pumping tubes provides a robust configuration for demanding professional pumping environments.
Compact Equipment Footprint
The D3522 Attachment measures 76 inches long, 37 inches wide, and 39 inches high. The hopper charging height is 28 inches.
Its compact dimensions provide a practical equipment footprint for contractors working on professional jobsites.
Choosing Epoxy Pumping Equipment
Selecting the appropriate Epoxy Pumping Equipment depends on several factors, including the material being pumped, required flow rate, pressure requirements, available power source, and jobsite conditions.
For contractors working with hot epoxy grout who already have a suitable hydraulic power unit, the D3522 Attachment provides a dedicated hydraulic-powered pumping option.
Its variable-speed output and pressure capability allow contractors to select an appropriate pumping rate for their application while using an existing hydraulic power source.
Request Information About the D3522 Attachment
If you are searching for an Epoxy Injection Pump or professional Epoxy Pumping Equipment for hot epoxy grouting, the Blastcrete D3522 Attachment provides a hydraulic-powered solution designed for contractors with existing hydraulic power units.
The D3522 offers:
0–6 cubic yards per hour variable-speed output
Up to 400 PSI pumping pressure
2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
10 GPM hydraulic oil requirement at 3,000 PSI
Long-lasting pumping tubes
No epoxy contact with moving pump components
Straightforward operation and maintenance
For pricing and product information, visit the Quote Now page.
For additional product information and specifications, download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment is a hydraulic-powered solution for contractors involved in hot epoxy grouting. Its 2-inch squeeze-pump design, heavy-duty planetary gearbox, variable-speed output, and pressure capability provide a practical combination for professional pumping applications.
For contractors looking for Epoxy Pumping Equipment that can connect to an existing hydraulic power unit, the D3522 offers a straightforward approach to hot epoxy material pumping.
With an output capacity of 0–6 cubic yards per hour and pumping pressure of up to 400 PSI, the D3522 Attachment is designed to provide controlled pumping performance while keeping epoxy material away from the pump's moving components.
D3522 Attachment: Epoxy Pumping Equipment for Professional Grouting Applications
