Professional contractors need dependable equipment when working on demanding grouting and concrete repair projects. The Blastcrete D3522 Attachment is a hydraulic-powered pumping solution designed for hot epoxy grouting contractors who already have a compatible hydraulic power unit.
For companies searching for Concrete Grouting Equipment for Sale or an Epoxy Grouting Equipment Supplier, the D3522 offers variable-speed pumping from 0 to 6 cubic yards per hour and pumping pressure of up to 400 PSI.
Its 2-inch hydraulic squeeze-pump design, heavy-duty planetary gearbox, and long-lasting pumping tubes provide a practical configuration for professional hot epoxy grouting applications.
Concrete Grouting Equipment for Sale for Professional Contractors
When searching for Concrete Grouting Equipment for Sale, contractors need to consider pumping capacity, pressure, equipment compatibility, maintenance, and jobsite requirements.
The D3522 Attachment is designed for contractors who already own hydraulic power units. Instead of requiring a separate dedicated power source, the attachment can be coupled to a compatible hydraulic power system.
This allows contractors to use an existing hydraulic power unit to operate the pump while adding specialized hot epoxy pumping capability to their equipment fleet.
The D3522 provides variable-speed output between 0 and 6 cubic yards per hour, giving operators flexibility when controlling material flow.
Epoxy Grouting Equipment Supplier for Industrial Applications
An Epoxy Grouting Equipment Supplier should provide equipment that matches the demands of professional grouting applications. The D3522 is specifically designed for hot epoxy grouting contractors and provides a hydraulic-powered pumping solution.
The system can deliver up to 400 PSI pumping pressure, while its hydraulic requirement is 10 GPM at 3,000 PSI.
Before purchasing, contractors should confirm that their available hydraulic power unit meets these requirements.
Understanding the D3522 Attachment
The D3522 Attachment uses a simple 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
The hydraulic power unit provides the power required to operate the pumping system. The operator can then adjust the pumping rate within the available range of 0–6 cubic yards per hour.
This design provides a straightforward approach to hot epoxy pumping for contractors who already have compatible hydraulic equipment.
Important D3522 Features
2-Inch Hydraulic Squeeze Pump
The D3522 uses a 2-inch hydraulic squeeze pump designed for professional pumping applications. The pump is driven by a heavy-duty planetary gearbox.
The squeeze-pump configuration provides a simple pumping mechanism for hot epoxy grouting work.
Variable-Speed Pumping
The D3522 provides an output range of 0–6 cubic yards per hour. Variable-speed operation allows contractors to adjust material flow according to project requirements.
Up to 400 PSI Pumping Pressure
The pump can deliver up to 400 PSI pumping pressure, providing substantial pressure capability for professional hot epoxy grouting applications.
Hydraulic Power Unit Compatibility
The D3522 Attachment is intended for contractors who already have suitable hydraulic power units.
The specified hydraulic requirement is:
10 GPM at 3,000 PSI
Contractors should verify compatibility before purchasing the equipment.
Long-Lasting Pumping Tubes
The D3522 incorporates long-lasting pumping tubes designed for demanding professional pumping environments.
Simple Maintenance Design
The pump is designed to be straightforward to operate and maintain. An important feature is that epoxy material does not come into contact with the moving parts of the pump.
Keeping epoxy away from moving components can help reduce direct material exposure and support equipment longevity.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Applications for Concrete and Epoxy Grouting
The Blastcrete D3522 Attachment is designed primarily for hot epoxy grouting contractors. Depending on material compatibility and project requirements, it can be considered for professional grouting and concrete repair applications.
Potential applications include:
Hot epoxy grouting
Concrete repair projects
Industrial grouting
Structural grouting
Industrial maintenance
Heavy-duty epoxy pumping
Professional construction grouting
Hydraulic-powered material pumping
The specific suitability of the D3522 should be evaluated according to the material being pumped and the requirements of each project.
Why Contractors May Choose the D3522
Utilize Existing Hydraulic Equipment
For contractors who already have a compatible hydraulic power unit, the D3522 provides a way to add specialized epoxy pumping capability without requiring a completely separate power system.
Control Material Output
The variable-speed pumping range of 0–6 cubic yards per hour provides flexibility for different job requirements.
Professional Pressure Capability
With pressure of up to 400 PSI, the D3522 provides substantial pumping capability for demanding hot epoxy grouting applications.
Straightforward Pump Design
The hydraulic squeeze-pump configuration is designed around simplicity, helping make operation and routine maintenance more straightforward.
Protect Moving Pump Components
Because epoxy material does not come into contact with the moving pump components, the design helps separate the material from important mechanical parts.
Choosing an Epoxy Grouting Equipment Supplier
When selecting an Epoxy Grouting Equipment Supplier, contractors should look beyond the initial equipment purchase and consider the technical specifications of the pump.
Important factors include:
Hydraulic power requirements
Pumping capacity
Maximum pressure
Material compatibility
Pump design
Equipment dimensions
Maintenance requirements
Intended application
For the D3522, the hydraulic power requirement is 10 GPM at 3,000 PSI. Contractors should ensure their existing hydraulic power unit is suitable for the attachment.
Compact Design for Jobsite Operations
The D3522 Attachment has a practical equipment footprint:
Length: 76 inches
Width: 37 inches
Height: 39 inches
Hopper charging height: 28 inches
These dimensions should be considered when planning transportation, equipment placement, and jobsite access.
Request Information About Concrete Grouting Equipment for Sale
If you are looking for Concrete Grouting Equipment for Sale or an Epoxy Grouting Equipment Supplier, the Blastcrete D3522 Attachment provides a hydraulic-powered solution for professional hot epoxy grouting contractors.
The D3522 offers:
Output Capacity: 0–6 cubic yards per hour
Maximum Pumping Pressure: Up to 400 PSI
Pump: 2-inch hydraulic squeeze pump
Drive: Heavy-duty planetary gearbox
Hydraulic Requirement: 10 GPM @ 3,000 PSI
For pricing and product information, visit the Quote Now page.
For additional technical information, you can download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment provides a practical hydraulic-powered solution for contractors involved in hot epoxy grouting. Its variable-speed output of 0–6 cubic yards per hour, pressure capability of up to 400 PSI, and 2-inch hydraulic squeeze-pump design make it suitable for demanding professional pumping applications.
For contractors searching for Concrete Grouting Equipment for Sale, the D3522 can provide specialized pumping capability when connected to a compatible hydraulic power unit.
For companies looking for an Epoxy Grouting Equipment Supplier, the D3522 offers a straightforward equipment configuration featuring a heavy-duty planetary gearbox, durable pumping tubes, and a design that keeps epoxy material away from moving pump components.
Before purchasing, contractors should verify hydraulic compatibility and confirm that the equipment is suitable for the specific material and application.
Concrete Grouting Equipment for Sale: D3522 Attachment for Epoxy Grouting
