Professional contractors working with hot epoxy grouting materials need pumping equipment that can provide dependable output, pressure, and operational control. The Blastcrete D3522 Attachment is designed for contractors who already own compatible hydraulic power units and require a hydraulic-powered solution for professional epoxy pumping.
As a Heavy Duty Grouting Pump, the D3522 provides variable-speed pumping from 0 to 6 cubic yards per hour and can deliver up to 400 PSI pumping pressure.
The equipment features a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox, along with long-lasting pumping tubes designed for professional pumping applications.
D3522 Attachment for Heavy Duty Grouting
The D3522 Attachment is designed for hot epoxy grouting contractors who already have suitable hydraulic power equipment.
The attachment can be connected to a compatible hydraulic power unit, allowing contractors to utilize an existing hydraulic power source.
Once connected, the D3522 provides variable-speed pumping from 0–6 cubic yards per hour.
This output range provides operators with flexibility when controlling the delivery of compatible epoxy materials.
High Pressure Epoxy Pumping Capability
When searching for a High Pressure Epoxy Pump, contractors should consider both maximum pressure and actual application requirements.
The D3522 can deliver up to:
400 PSI pumping pressure
This provides useful pressure capability for professional hot epoxy grouting applications within the equipment's rated specifications.
The appropriate operating pressure should always be determined according to the epoxy material specifications and the requirements of the particular project.
Hydraulic Power Requirements
The D3522 is powered by a compatible hydraulic power unit.
Its specified hydraulic requirement is:
10 GPM @ 3,000 PSI
Before purchasing or operating the D3522, contractors should confirm that their existing hydraulic power unit meets these requirements.
Using an appropriate hydraulic power source is essential for the equipment to operate according to its intended specifications.
2-Inch Hydraulic Squeeze Pump
The D3522 uses a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
This design provides a straightforward pumping mechanism for compatible hot epoxy grouting materials.
The simple configuration is intended to make the equipment practical to operate and maintain for professional contractors.
Heavy-Duty Planetary Gearbox
A major component of the D3522 is its heavy-duty planetary gearbox.
The gearbox drives the 2-inch hydraulic squeeze pump and forms an important part of the equipment's pumping system.
Combined with the long-lasting pumping tubes, the gearbox provides a robust configuration for professional hot epoxy pumping applications.
Epoxy Material Does Not Contact Moving Pump Components
The D3522 has a design in which epoxy material does not come into contact with the moving parts of the pump.
This keeps the pumped material separated from key mechanical components.
For contractors looking for a High Pressure Epoxy Pump, this design characteristic can be an important consideration when evaluating equipment for repeated professional use.
Variable-Speed Pumping
The D3522 provides an output range of:
0–6 cubic yards per hour
Variable-speed pumping allows the operator to adjust material delivery within the equipment's rated range.
This flexibility can be useful for different grouting requirements, provided the material and application are compatible with the equipment.
Long-Lasting Pumping Tubes
The D3522 incorporates long-lasting pumping tubes designed for professional pumping applications.
Durable pumping components are particularly useful for contractors who regularly perform hot epoxy grouting and other demanding pumping work.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Applications for a Heavy Duty Grouting Pump
The D3522 is designed for hot epoxy grouting contractors. Depending on material compatibility and project requirements, it may be considered for several professional applications.
Potential applications include:
Hot epoxy grouting
Industrial grouting
Concrete repair
Structural grouting
Heavy-duty epoxy pumping
Industrial maintenance
Concrete crack repair
Professional construction grouting
Hydraulic-powered material pumping
The specific suitability of the equipment should be evaluated according to the material and project requirements.
Choosing a High Pressure Epoxy Pump
Selecting a High Pressure Epoxy Pump requires more than simply looking at maximum PSI.
Contractors should evaluate:
Pumping Pressure
The D3522 provides up to 400 PSI pumping pressure. The required pressure should be established according to the epoxy material and application.
Pumping Capacity
The D3522 provides variable output from 0–6 cubic yards per hour, allowing operators to control material delivery.
Hydraulic Compatibility
The hydraulic power unit must provide 10 GPM at 3,000 PSI.
Material Compatibility
The epoxy or grout material should be suitable for the equipment and the intended application.
Equipment Dimensions
The pump's physical dimensions should be considered when planning transportation, installation, and jobsite access.
D3522 Dimensions
The D3522 Attachment measures:
Length: 76 inches
Width: 37 inches
Height: 39 inches
Hopper charging height: 28 inches
These measurements should be considered when planning equipment placement and jobsite operations.
Why Consider the D3522 Attachment?
Existing Hydraulic Power
The D3522 is designed for contractors who already have compatible hydraulic power units, allowing them to utilize an existing hydraulic power source.
Variable Output
The 0–6 cubic yards per hour pumping range gives operators flexibility in controlling material flow.
Up to 400 PSI
The equipment can deliver up to 400 PSI pumping pressure for compatible professional applications.
Simple Pumping Design
The 2-inch hydraulic squeeze pump and heavy-duty planetary gearbox provide a straightforward mechanical configuration.
Long-Lasting Pumping Tubes
The equipment incorporates long-lasting pumping tubes designed for professional pumping use.
Separation of Material From Moving Parts
Epoxy material does not come into contact with the moving pump components, helping isolate the material from key mechanical parts.
Hydraulic Requirements Before Purchase
Before selecting the D3522 as a Heavy Duty Grouting Pump or High Pressure Epoxy Pump, contractors should verify their existing hydraulic power unit.
The required hydraulic supply is:
10 GPM @ 3,000 PSI
Contractors should also review:
Epoxy material specifications
Required pumping pressure
Required flow rate
Project conditions
Equipment access
Material compatibility
Jobsite requirements
Proper planning helps ensure that the equipment matches the intended application.
Get Information About the D3522 Attachment
If you are searching for a Heavy Duty Grouting Pump or High Pressure Epoxy Pump, the Blastcrete D3522 Attachment provides a hydraulic-powered option for contractors with compatible hydraulic power units.
Key specifications include:
Output Capacity: 0–6 cubic yards per hour
Maximum Pumping Pressure: Up to 400 PSI
Pump: 2-inch hydraulic squeeze pump
Drive: Heavy-duty planetary gearbox
Hydraulic Requirement: 10 GPM @ 3,000 PSI
For pricing and product information, visit the Quote Now page.
For additional technical information, you can download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment provides a hydraulic-powered pumping solution for professional hot epoxy grouting contractors who already have a compatible hydraulic power unit.
As a Heavy Duty Grouting Pump, the D3522 offers variable-speed output from 0–6 cubic yards per hour, pressure capability of up to 400 PSI, and a 2-inch hydraulic squeeze-pump configuration.
For contractors searching for a High Pressure Epoxy Pump, the D3522 also features a heavy-duty planetary gearbox, long-lasting pumping tubes, and a design that keeps epoxy material away from moving pump components.
Before purchasing or operating the equipment, contractors should verify hydraulic compatibility and confirm that the pump, material, pressure, and flow requirements are appropriate for the specific project.
Heavy Duty Grouting Pump: D3522 Attachment for High Pressure Epoxy Pumping
