Professional contractors need reliable pumping equipment when working on demanding grouting and hot epoxy applications. The Blastcrete D3522 Attachment is designed for contractors who already own compatible hydraulic power units and need a practical Hydraulic Powered Grout Pump for professional pumping work.
The D3522 provides variable-speed pumping from 0 to 6 cubic yards per hour and can deliver up to 400 PSI pumping pressure.
Its 2-inch hydraulic squeeze-pump design, heavy-duty planetary gearbox, and long-lasting pumping tubes provide a straightforward pumping solution for Grouting Pump for Contractors applications.
Hydraulic Powered Grout Pump for Professional Contractors
A Hydraulic Powered Grout Pump can be a practical choice for contractors who already have a suitable hydraulic power unit available.
The D3522 Attachment is designed to connect to compatible hydraulic power equipment. Once coupled to the hydraulic power source, the pump can provide variable-speed material delivery from 0–6 cubic yards per hour.
This configuration allows contractors to use existing hydraulic power equipment while adding dedicated pumping capability for compatible hot epoxy grouting applications.
D3522 Attachment for Grouting Pump Contractors
The D3522 Attachment is specifically intended for hot epoxy grouting contractors who already own hydraulic power units.
The attachment provides:
0–6 cubic yards per hour output
Up to 400 PSI pumping pressure
2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
Long-lasting pumping tubes
Hydraulic requirement of 10 GPM at 3,000 PSI
These specifications make the D3522 a practical option for professional contractors evaluating hydraulic-powered grouting equipment.
How the Hydraulic Powered Grout Pump Works
The D3522 uses hydraulic power to drive its 2-inch squeeze pump through a heavy-duty planetary gearbox.
The hydraulic power unit supplies the required flow and pressure to operate the attachment.
The specified hydraulic requirement is:
10 GPM @ 3,000 PSI
Before purchasing or operating the D3522, contractors should confirm that their existing hydraulic power unit meets these specifications.
Variable-Speed Grouting Capability
The D3522 provides variable-speed pumping from:
0–6 cubic yards per hour
Variable-speed operation allows contractors to control the material delivery rate within the equipment's rated range.
For Grouting Pump for Contractors applications, adjustable output can provide flexibility when project conditions or material requirements vary.
The actual operating rate should be selected according to the material specifications and requirements of the specific application.
Up to 400 PSI Pumping Pressure
The D3522 can provide up to:
400 PSI pumping pressure
This pressure capability provides useful pumping performance for compatible professional hot epoxy grouting applications.
Contractors should determine the appropriate operating pressure based on the selected material and project requirements rather than automatically operating at the maximum rated pressure.
2-Inch Hydraulic Squeeze Pump
The D3522 features a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
The squeeze-pump design provides a straightforward pumping mechanism for compatible epoxy and grouting materials.
For contractors who regularly perform professional grouting work, the simple design can make the equipment practical to operate and maintain.
Heavy-Duty Planetary Gearbox
The heavy-duty planetary gearbox is a key part of the D3522 pumping system.
It drives the hydraulic squeeze pump and contributes to the equipment's professional-duty configuration.
Combined with long-lasting pumping tubes, the gearbox provides a robust pumping setup for demanding hot epoxy grouting applications.
Epoxy Material Does Not Contact Moving Parts
A notable characteristic of the D3522 is that epoxy material does not come into contact with the moving parts of the pump.
This keeps the pumped material separated from key mechanical components.
For Grouting Pump for Contractors applications, this design feature can be an important consideration when evaluating equipment for regular professional use.
Long-Lasting Pumping Tubes
The D3522 incorporates long-lasting pumping tubes designed for professional pumping applications.
Durable pumping components can be particularly useful for contractors who perform repeated hot epoxy grouting and industrial pumping work.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Applications for Grouting Pump Contractors
The D3522 is designed for hot epoxy grouting contractors. Depending on material compatibility and project requirements, it may be considered for a range of professional applications.
Potential applications include:
Hot epoxy grouting
Industrial grouting
Concrete repair
Structural grouting
Concrete crack repair
Industrial maintenance
Heavy-duty epoxy pumping
Professional construction grouting
Hydraulic-powered material pumping
Contractors should evaluate the specific material and application before selecting the equipment.
Why Contractors May Choose the D3522
Existing Hydraulic Power
The D3522 is designed for contractors who already own compatible hydraulic power units, allowing the attachment to use an existing hydraulic power source.
Adjustable Material Output
The 0–6 cubic yards per hour output range provides flexibility in controlling material delivery.
Pressure Capability
The equipment can deliver up to 400 PSI pumping pressure for compatible professional applications.
Simple Pumping Configuration
The 2-inch hydraulic squeeze pump and heavy-duty planetary gearbox provide a straightforward mechanical arrangement.
Long-Lasting Pumping Tubes
The equipment incorporates long-lasting pumping tubes designed for professional pumping use.
Separation of Epoxy From Moving Components
Because epoxy material does not contact the moving pump components, the design helps isolate the material from important mechanical parts.
Choosing a Grouting Pump for Contractors
When selecting a Grouting Pump for Contractors, several factors should be evaluated before purchase.
Hydraulic Compatibility
The hydraulic power unit should meet the D3522 requirement of 10 GPM at 3,000 PSI.
Pumping Capacity
The D3522 provides variable-speed output from 0–6 cubic yards per hour.
Pressure Requirements
The pump provides up to 400 PSI, but the appropriate operating pressure depends on the material and application.
Material Compatibility
The selected grout or epoxy should be compatible with the equipment and appropriate for the intended application.
Jobsite Conditions
Contractors should consider equipment dimensions, access, transportation, placement, and operating conditions.
D3522 Dimensions
The D3522 Attachment measures:
Length: 76 inches
Width: 37 inches
Height: 39 inches
Hopper charging height: 28 inches
These dimensions should be considered when planning transportation and equipment placement at the jobsite.
Hydraulic Requirements Before Purchase
Before selecting the D3522 as a Hydraulic Powered Grout Pump, contractors should confirm that their existing hydraulic power equipment meets the required specifications.
The specified requirement is:
10 GPM @ 3,000 PSI
Contractors should also evaluate:
Grouting material specifications
Required pumping rate
Required pumping pressure
Material compatibility
Project conditions
Equipment access
Jobsite requirements
Proper equipment selection helps ensure that the pump is appropriate for the intended application.
Request Information About the D3522 Attachment
If you are looking for a Hydraulic Powered Grout Pump or a Grouting Pump for Contractors, the Blastcrete D3522 Attachment provides a hydraulic-powered pumping solution for contractors with compatible hydraulic power units.
Key specifications include:
Output Capacity: 0–6 cubic yards per hour
Maximum Pumping Pressure: Up to 400 PSI
Pump: 2-inch hydraulic squeeze pump
Drive: Heavy-duty planetary gearbox
Hydraulic Requirement: 10 GPM @ 3,000 PSI
For pricing and product information, visit the Quote Now page.
For additional technical information, you can download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment provides a hydraulic-powered pumping solution for professional hot epoxy grouting contractors who already have compatible hydraulic power equipment.
As a Hydraulic Powered Grout Pump, the D3522 offers variable-speed output from 0–6 cubic yards per hour, pumping pressure of up to 400 PSI, and a 2-inch hydraulic squeeze-pump design.
For a Grouting Pump for Contractors, the D3522 also features a heavy-duty planetary gearbox, long-lasting pumping tubes, and a design that keeps epoxy material away from moving pump components.
Before purchasing or operating the equipment, contractors should verify hydraulic compatibility and confirm that the pump, material, pressure, and flow requirements are appropriate for the specific project.
Hydraulic Powered Grout Pump: D3522 Attachment for Grouting Pump Contractors
