Professional hot epoxy grouting contractors need pumping equipment that provides dependable pressure, adjustable output, and practical operation. The Blastcrete D3522 Attachment is designed for contractors who already own compatible hydraulic power units and need a hydraulic-powered solution for professional grouting applications.
The D3522 operates with variable-speed pumping from 0 to 6 cubic yards per hour and delivers up to 400 PSI pumping pressure.
With its 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, and long-lasting pumping tubes, the D3522 provides a practical configuration for demanding hot epoxy grouting work.
D3522 Attachment: 400 PSI Grout Pump
The D3522 Attachment is designed specifically for hot epoxy grouting contractors who already have suitable hydraulic power equipment.
When connected to a compatible hydraulic power unit, the D3522 provides variable-speed material pumping from 0–6 cubic yards per hour.
The pump can deliver up to 400 PSI, making it a useful option for compatible professional grouting applications where controlled material delivery and pressure are required.
400 PSI Grout Pump for Professional Applications
A 400 PSI Grout Pump provides pressure capability that can be useful for demanding grouting applications.
The D3522's maximum pumping pressure is:
Up to 400 PSI
The appropriate operating pressure depends on the grout or epoxy material, application method, and project requirements. Contractors should always follow the material manufacturer's recommendations and applicable project specifications.
The 400 PSI rating represents the pump's maximum stated pumping pressure rather than a required operating pressure for every application.
6 Cubic Yards Per Hour Pumping Capacity
The D3522 provides variable-speed output from:
0–6 cubic yards per hour
Its maximum stated output is 6 cubic yards per hour.
This makes the D3522 a 6 Cubic Yards Per Hour Pump for contractors who need adjustable pumping capacity for compatible hot epoxy grouting applications.
Variable-speed operation allows operators to control material delivery within the pump's rated range.
Hydraulic Power Requirements
The D3522 is designed to operate with a compatible hydraulic power unit.
The specified hydraulic requirement is:
10 GPM @ 3,000 PSI
Contractors should verify that their existing hydraulic power unit meets these requirements before purchasing or operating the attachment.
Proper hydraulic compatibility is essential for achieving the equipment's intended performance.
2-Inch Hydraulic Squeeze Pump
The D3522 features a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
This pumping configuration provides a straightforward mechanism for delivering compatible hot epoxy and grouting materials.
The simple design is intended to support practical operation and maintenance for professional contractors.
Heavy-Duty Planetary Gearbox
The D3522 uses a heavy-duty planetary gearbox to drive its hydraulic squeeze-pump system.
The gearbox forms an important part of the pumping mechanism and contributes to the equipment's professional-duty configuration.
Together with long-lasting pumping tubes, the gearbox supports the D3522's intended use in demanding grouting applications.
Epoxy Material Does Not Contact Moving Parts
An important design characteristic of the D3522 is that epoxy material does not come into contact with the moving parts of the pump.
This separates the pumped material from key mechanical components.
For contractors performing repeated hot epoxy grouting work, this design can be an important consideration when selecting pumping equipment.
Long-Lasting Pumping Tubes
The D3522 incorporates long-lasting pumping tubes designed for professional pumping applications.
The pumping tubes, together with the heavy-duty planetary gearbox, provide a robust configuration for contractors working with compatible epoxy grouting materials.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Applications for a 400 PSI Grout Pump
The D3522 is intended for hot epoxy grouting contractors. Depending on material compatibility and project requirements, it may be considered for professional applications such as:
Hot epoxy grouting
Industrial grouting
Concrete repair
Structural grouting
Concrete crack repair
Industrial maintenance
Heavy-duty epoxy pumping
Construction grouting
Hydraulic-powered material pumping
The pump should be selected according to the material, application, and project requirements.
Benefits of the D3522 Attachment
Up to 400 PSI
The D3522 can provide up to 400 PSI pumping pressure for compatible professional applications.
Up to 6 Cubic Yards Per Hour
The pump provides variable output up to 6 cubic yards per hour, giving contractors adjustable material delivery.
Existing Hydraulic Power Unit
The attachment is designed for contractors who already own compatible hydraulic power units.
2-Inch Hydraulic Squeeze Pump
The 2-inch squeeze-pump configuration provides a straightforward pumping mechanism for compatible epoxy materials.
Heavy-Duty Planetary Gearbox
The heavy-duty gearbox provides the drive mechanism for the hydraulic squeeze pump.
Long-Lasting Pumping Tubes
The D3522 incorporates long-lasting pumping tubes designed for professional use.
Material Separation
Epoxy material does not come into contact with the moving pump components, keeping the material separated from key mechanical parts.
Choosing a 6 Cubic Yards Per Hour Pump
When evaluating a 6 Cubic Yards Per Hour Pump, contractors should consider more than maximum output.
Important factors include:
Required Flow Rate: Determine the actual material delivery rate required for the project.
Required Pressure: Verify that the pump's pressure capability matches the application's requirements.
Material Compatibility: Confirm that the epoxy or grout is compatible with the pumping equipment.
Hydraulic Supply: Verify that the hydraulic power unit can provide 10 GPM at 3,000 PSI.
Jobsite Conditions: Consider access, equipment placement, transportation, and operating conditions.
D3522 Dimensions
The D3522 Attachment has the following dimensions:
Length: 76 inches
Width: 37 inches
Height: 39 inches
Hopper charging height: 28 inches
These dimensions should be considered when planning transportation, equipment positioning, and jobsite access.
Hydraulic Requirements Before Purchase
Before selecting the D3522 as a 400 PSI Grout Pump, contractors should verify their existing hydraulic power equipment.
The specified hydraulic requirement is:
10 GPM @ 3,000 PSI
Contractors should also evaluate:
Grout or epoxy specifications
Required pumping pressure
Required material flow
Material compatibility
Jobsite conditions
Equipment access
Application requirements
Proper equipment selection helps ensure that the pump is suitable for the intended project.
Get Information About the D3522 Attachment
If you are searching for a 400 PSI Grout Pump or a 6 Cubic Yards Per Hour Pump, the Blastcrete D3522 Attachment provides a hydraulic-powered pumping solution for contractors with compatible hydraulic power units.
Key specifications include:
Maximum Pumping Pressure: Up to 400 PSI
Output Capacity: 0–6 cubic yards per hour
Pump: 2-inch hydraulic squeeze pump
Drive: Heavy-duty planetary gearbox
Hydraulic Requirement: 10 GPM @ 3,000 PSI
For pricing and product information, visit the Quote Now page.
For additional product information, you can download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment provides a hydraulic-powered pumping solution for professional hot epoxy grouting contractors with compatible hydraulic power units.
As a 400 PSI Grout Pump, the D3522 offers pumping pressure of up to 400 PSI and variable-speed output from 0–6 cubic yards per hour.
Its 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, long-lasting pumping tubes, and design that keeps epoxy material away from moving pump components provide a practical configuration for compatible professional applications.
Contractors should verify hydraulic compatibility and confirm that the pump's pressure, output, and material compatibility meet the requirements of their specific grouting project before operation.
400 PSI Grout Pump: D3522 Attachment With 6 Cubic Yards Per Hour Capacity
