Industrial grouting projects require dependable pumping equipment that can provide controlled material delivery and suitable pressure for demanding applications. The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors who already have compatible hydraulic power units.
The D3522 is an industrial epoxy grouting pump for contractors that provides variable-speed pumping from 0 to 6 cubic yards per hour and delivers up to 400 PSI pumping pressure. Its 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, and long-lasting pumping tubes make it a practical solution for compatible professional grouting applications.
What Is the D3522 Attachment?
The D3522 Attachment is a hydraulic-powered pumping system designed for hot epoxy grouting contractors.
It can be coupled to a compatible hydraulic power unit, allowing contractors who already have hydraulic equipment to operate the pump using an existing power source.
Key features include:
2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
Variable-speed pumping
0–6 cubic yards per hour output
Up to 400 PSI pumping pressure
Long-lasting pumping tubes
Hydraulic requirement of 10 GPM at 3,000 PSI
Industrial Epoxy Grouting Pump for Contractors
An industrial epoxy grouting pump for contractors needs to provide appropriate material flow, pressure, and compatibility for professional jobsite conditions.
The D3522 is designed specifically for hot epoxy grouting contractors who require a hydraulic-powered pumping solution.
Its variable-speed capability allows the operator to control output within the rated range, while its 400 PSI pressure capability provides a useful pressure rating for compatible applications.
Contractors should always determine the correct operating conditions according to the epoxy grout manufacturer's specifications and project requirements.
Variable-Speed Pumping From 0–6 Cubic Yards Per Hour
The D3522 provides variable-speed pumping from:
0–6 cubic yards per hour
This output range allows contractors to adjust material delivery according to the needs of the application.
Variable-speed pumping can be useful when working on projects where material flow requirements change during the grouting process.
The appropriate pumping rate should be selected according to the material specifications, project conditions, and application requirements.
Up to 400 PSI Pumping Pressure
The D3522 provides pumping pressure of up to:
400 PSI
This makes the equipment suitable for compatible applications where the required pumping pressure falls within its rated capability.
The maximum rated pressure should not be considered the recommended operating pressure for every application. Contractors should follow the manufacturer's instructions for the selected grout material and determine the appropriate operating pressure for the project.
2-Inch Hydraulic Squeeze Pump
The D3522 uses a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
The squeeze-pump design provides a straightforward system for pumping compatible epoxy grout materials.
For contractors looking for industrial epoxy grouting equipment, the 2-inch pump configuration provides an important specification to consider when matching equipment to project requirements.
Heavy-Duty Planetary Gearbox
A heavy-duty planetary gearbox drives the D3522's hydraulic squeeze pump.
The gearbox provides the mechanical drive necessary for pumping and contributes to the equipment's heavy-duty configuration.
This combination of hydraulic power, planetary gearing, and squeeze-pump operation is designed for professional grouting applications.
Epoxy Material Does Not Contact Moving Parts
One of the notable characteristics of the D3522 is that epoxy material does not come into contact with the moving parts of the pump.
This design keeps the pumped material separate from key mechanical components.
For contractors evaluating industrial epoxy pumping equipment, the separation of epoxy from moving pump components can be an important consideration when comparing different equipment designs.
Long-Lasting Pumping Tubes
The D3522 features long-lasting pumping tubes designed for professional pumping applications.
Pumping tubes are an important component of squeeze-pump equipment because they directly participate in material delivery.
For contractors who regularly perform hot epoxy grouting, tube durability can be an important consideration when selecting equipment for ongoing projects.
Hydraulic Power Requirements
The D3522 requires a compatible hydraulic power unit capable of providing:
10 GPM @ 3,000 PSI
Contractors should verify their existing hydraulic power unit before purchasing or connecting the D3522.
Ensuring that the hydraulic power source meets the specified requirements is essential for proper equipment operation.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Applications for Industrial Epoxy Grouting
The D3522 is intended for hot epoxy grouting contractors. Depending on material compatibility and project requirements, potential applications include:
Industrial epoxy grouting
Hot epoxy grouting
Structural grouting
Concrete repair
Concrete crack repair
Industrial maintenance
Construction grouting
Heavy-duty epoxy pumping
Professional grout pumping
Before using the equipment, contractors should confirm that the selected material is compatible with the pump and suitable for the intended application.
Benefits for Industrial Grouting Contractors
Hydraulic-Powered Operation
The D3522 is designed to connect to a compatible hydraulic power unit, making it suitable for contractors who already own hydraulic equipment.
Variable-Speed Control
The pump offers output from 0–6 cubic yards per hour, allowing material delivery to be adjusted within its rated range.
400 PSI Pressure Capability
The system provides up to 400 PSI pumping pressure for compatible applications.
Simple Pump Configuration
The 2-inch hydraulic squeeze pump provides a straightforward pumping system for professional grouting.
Heavy-Duty Gearbox
The planetary gearbox provides the mechanical drive for the squeeze pump.
Long-Lasting Pumping Tubes
The equipment incorporates long-lasting pumping tubes designed for professional pumping applications.
Epoxy Separation
Epoxy material does not come into contact with the moving parts of the pump.
How Contractors Can Select Industrial Epoxy Grouting Equipment
Selecting an industrial epoxy grouting pump for contractors requires consideration of several specifications.
Determine Required Flow Rate
Compare the project's material delivery requirements with the D3522's 0–6 cubic yards per hour capacity.
Check Pressure Requirements
Determine whether the required pumping pressure falls within the D3522's maximum capability of 400 PSI.
Verify Hydraulic Compatibility
Ensure that the existing hydraulic power unit meets the requirement of 10 GPM at 3,000 PSI.
Confirm Material Compatibility
The epoxy grout or other material being pumped should be compatible with the equipment and suitable for the intended application.
Consider Equipment Dimensions
The D3522's physical dimensions should be considered when planning transportation, jobsite access, and equipment placement.
D3522 Dimensions
The D3522 Attachment measures:
Length: 76 inches
Width: 37 inches
Height: 39 inches
Hopper charging height: 28 inches
These dimensions can help contractors plan jobsite positioning and transportation requirements.
Why Consider the D3522 Attachment?
The D3522 provides an attachment-based pumping solution for contractors who already own compatible hydraulic power units.
Its combination of variable-speed pumping, up to 400 PSI pressure capability, a 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, and long-lasting pumping tubes makes it a practical option for compatible industrial epoxy grouting applications.
The design also keeps epoxy material away from the moving parts of the pump, which can be an important consideration when evaluating pumping equipment for professional use.
D3522 for Professional Grouting Contractors
For contractors searching for an industrial epoxy grouting pump for contractors, the D3522 offers a combination of hydraulic-powered operation, adjustable output, and professional-duty components.
Key specifications include:
Pump Type: 2-inch hydraulic squeeze pump
Output Capacity: 0–6 cubic yards per hour
Maximum Pumping Pressure: Up to 400 PSI
Drive System: Heavy-duty planetary gearbox
Hydraulic Requirement: 10 GPM @ 3,000 PSI
For pricing and product information, visit the Quote Now page.
For additional product information, you can download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors who already have compatible hydraulic power units.
As an industrial epoxy grouting pump for contractors, it provides variable-speed output from 0–6 cubic yards per hour and pumping pressure of up to 400 PSI.
Its 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, long-lasting pumping tubes, and design that prevents epoxy material from contacting moving pump components provide a practical configuration for compatible professional grouting applications.
Before purchasing or operating the D3522, contractors should verify hydraulic compatibility and confirm that its pressure, output capacity, material compatibility, dimensions, and application requirements meet the needs of the specific project.
Industrial Epoxy Grouting Pump for Contractors: D3522 Attachment
