Field batching can make material preparation more efficient when mixing and pumping need to take place directly at the job site. For contractors handling gypsum flooring and other compatible applications, choosing dependable field batching equipment is essential for maintaining an organized material workflow.
The Blastcrete D6528 Mixer/Pump is designed specifically for field batching and pumping, with an output capacity of up to 12 cubic yards per hour. The machine combines a hydraulic spiral mixer, receiving hopper, hydraulic agitator, and squeeze pump into one integrated system.
What Is Field Batching Equipment?
Field batching equipment is used to prepare materials directly at a construction site before delivering them to the application area. Instead of relying entirely on pre-mixed material, contractors can use field batching equipment to mix materials according to project requirements and then pump the finished mixture where it is needed.
The D6528 is designed around this process. Its 9 cubic foot hydraulic spiral mixer provides the primary mixing stage. Once the material is mixed, the hydraulic dump system transfers it into a 12 cubic foot receiving hopper.
From the hopper, a 3-inch hydraulic squeeze pump moves the material toward the installation area.
D6528 Field Batching Mixer
A reliable field batching mixer needs to provide sufficient mixing capacity while also supporting efficient material transfer. The D6528 combines these functions in one machine.
The 9 cubic foot hydraulic spiral mixer includes a hydraulic dump and clean-out door. After mixing, material is discharged into the receiving hopper, which has a capacity of 12 cubic feet.
The hopper is equipped with a hydraulic agitator to help manage material before it enters the pumping system.
This integrated configuration allows contractors to handle mixing and pumping without requiring separate primary machines for each stage.
How the D6528 Field Batching System Works
The D6528 uses a straightforward sequence from material preparation to pumping.
1. Material Preparation
The required material is loaded into the 9 cubic foot hydraulic spiral mixer. The mixer provides the field batching stage for preparing the material.
2. Hydraulic Mixing
The hydraulic spiral mixer blends the material before it is discharged. The hydraulic system provides the power required for the mixing and dumping functions.
3. Mixer Discharge
Once mixing is complete, the mixer hydraulically dumps the material into the 12 cubic foot receiving hopper.
4. Hopper Agitation
A hydraulic agitator in the receiving hopper helps manage the mixed material before pumping.
5. Material Pumping
The D6528's 3-inch hydraulic squeeze pump transfers the material from the hopper toward the application area.
6. Variable Output
The pumping system provides variable output from 0 to 12 cubic yards per hour, giving operators control over material delivery.
Main Features of the D6528
The D6528 incorporates several features designed for field operation.
9 Cubic Foot Hydraulic Spiral Mixer
The machine's 9 cubic foot mixer provides the batching capacity needed for field material preparation. It features a hydraulic dump system and a clean-out door.
12 Cubic Foot Receiving Hopper
The receiving hopper has a 12 cubic foot capacity and includes a hydraulic agitator. It receives the material from the mixer before the pumping stage.
3-Inch Hydraulic Squeeze Pump
A 3-inch hydraulic squeeze pump delivers material from the receiving hopper. The pump is driven by a heavy-duty planetary gearbox and operates at variable speeds.
Long-Lasting Pumping Tubes
The D6528 is equipped with pumping tubes designed for extended service life, supporting repeated pumping operations.
Integrated Equipment Design
By combining the mixer, hopper, agitator, and pump, the D6528 provides contractors with a single field batching and pumping unit.
D6528 Specifications
Specification D6528
Length 204 inches
Width 88 inches
Water Tank Height 89 inches
Mixer Height — Dump Position 86 inches
Charging Height 48 inches
Output Capacity 0–12 cubic yards per hour
Mixer Capacity 9 cubic feet
Receiving Hopper Capacity 12 cubic feet
Pump 3-inch hydraulic squeeze pump
These specifications can help contractors evaluate the D6528 for transportation, job-site setup, production requirements, and material-handling needs.
Power Options for Field Batching
The D6528 is available with two power configurations.
Kubota V1505 Diesel
The diesel version uses a Kubota V1505 29 HP water-cooled diesel engine. This configuration can be useful for field operations where an independent power source is preferred.
30 HP Electric Motor
An electric configuration is also available with a 30 HP electric motor with starter and disconnect. This option can be suitable for job sites with the required electrical supply.
The choice between diesel and electric power can depend on site conditions, available utilities, transportation requirements, and contractor preferences.
Optional Equipment
Contractors can select from several options when configuring the D6528:
Pendant or wireless remote
150-gallon water tank with 2-inch flow meter
Mounted spare tire
Hydraulic pressure washer
Dual axles
Mounted air compressor
These options can provide additional flexibility for different field batching and pumping environments.
Benefits of Using a Field Batching Mixer
Using a dedicated field batching mixer can provide several practical advantages for contractors working with compatible materials.
Job-Site Material Preparation
The D6528 allows material to be mixed at the job site, providing a dedicated batching system rather than requiring a separate mixing machine.
Combined Mixing and Pumping
The mixer and pump are integrated into one equipment package. Material can move directly from the mixer to the receiving hopper and then into the pump.
Controlled Material Delivery
The variable-speed pump provides an output range of 0 to 12 cubic yards per hour, allowing operators to control the rate of material delivery.
Reduced Equipment Complexity
Combining multiple functions in one machine can simplify the overall job-site equipment arrangement.
Field Batching for Gypsum Flooring
The D6528 is described as a popular solution for gypsum flooring applications. Its combination of field batching and pumping capabilities makes it suitable for contractors who need to prepare and deliver gypsum flooring materials at the project site.
The hydraulic spiral mixer handles the batching stage, while the receiving hopper and squeeze pump provide the material transfer system.
For any specific gypsum product, contractors should follow the material manufacturer's requirements for mixing, water content, pumping, application, and curing.
Choosing the Right Field Batching Equipment
Before selecting field batching equipment, contractors should consider the requirements of the project rather than focusing only on maximum output.
Important factors include:
Required production volume
Mixer capacity
Pump capacity
Material characteristics
Pumping distance
Job-site access
Available power
Transportation requirements
Cleaning and maintenance needs
Optional equipment requirements
The D6528 provides a combination of 9 cubic foot mixing capacity and 0–12 cubic yards per hour pumping output, giving contractors a starting point for evaluating its suitability.
Maintenance and Cleaning
Proper maintenance is an important part of operating field batching equipment. The D6528 includes a mixer clean-out door to assist with cleaning after mixing operations.
Operators should follow the manufacturer's recommended maintenance procedures for the hydraulic system, mixer, pump, pumping tubes, and other components.
Regular inspection and proper cleaning can help maintain equipment performance and reduce avoidable downtime.
D6528 for Field Batching and Pumping
The D6528 brings several stages of material handling into one machine. The hydraulic spiral mixer prepares the material, the hydraulic dump transfers it to the receiving hopper, and the squeeze pump delivers it toward the application area.
This makes the machine a versatile option for contractors searching for field batching equipment that can perform both mixing and pumping.
With a maximum output of 12 cubic yards per hour, the D6528 is designed to support field production while providing variable control over pumping speed.
D6528 Field Batching Equipment for Reliable Mixing and Pumping
