Efficient material preparation and controlled pumping are important for contractors working on flooring projects. The D6528 hydraulic mixer and pump for flooring combines mixing and pumping functions into one integrated machine, providing a practical solution for field batching and compatible gypsum flooring applications.
The D6528 Mixer/Pump is designed for field batching and pumping at rates of up to 12 cubic yards per hour. It features a 9-cubic-foot hydraulic spiral mixer, a 12-cubic-foot receiving hopper, and a 3-inch hydraulic squeeze pump with variable-speed operation.
D6528 Hydraulic Mixer and Pump for Flooring
The D6528 is designed to simplify the process of preparing and delivering material at the jobsite. Instead of requiring separate equipment for mixing and pumping, the machine combines both functions into one system.
The process begins with the 9-cubic-foot hydraulic spiral mixer, where the material is prepared. Once mixing is complete, the mixer hydraulically dumps the material into the 12-cubic-foot receiving hopper.
From the hopper, the material enters the D6528's 3-inch hydraulic squeeze pump. The pump provides variable output from 0 to 12 cubic yards per hour, allowing operators to regulate material delivery according to project requirements.
Portable Gypsum Flooring Mixer Pump
Contractors searching for a portable gypsum flooring mixer pump often need equipment that can be transported and configured for different jobsite requirements.
The D6528 is designed as an integrated field-batching and pumping machine, with a range of available options that can support different operating conditions. Available configurations include dual axles, a mounted spare tire, water tank, remote controls, and other accessories.
The machine measures 204 inches in length and 88 inches in width, with a charging height of 48 inches. These dimensions should be considered when planning transportation, access, and jobsite placement.
The term "portable" should be evaluated in relation to the project's transportation and access requirements, as the D6528 is substantial jobsite equipment rather than a small hand-portable mixer.
Hydraulic Mixing System
The D6528 uses a 9-cubic-foot hydraulic spiral mixer for field batching.
Hydraulic operation provides the power needed for mixing and hydraulic dumping. After the batch is prepared, the mixer can dump directly into the receiving hopper.
A hydraulic clean-out door is also included, helping operators with routine equipment cleaning after material processing.
12-Cubic-Foot Receiving Hopper
The mixed material is transferred into the D6528's 12-cubic-foot receiving hopper.
The hopper includes a hydraulic agitator designed to help manage material before it enters the squeeze pump. This creates a continuous material-handling path between the mixer and pump.
The combination of the 9-cubic-foot mixer and 12-cubic-foot hopper provides an integrated system for field batching and pumping.
3-Inch Hydraulic Squeeze Pump
The D6528 uses a 3-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
The pump provides variable-speed output from 0 to 12 cubic yards per hour. Variable speed allows operators to adjust the pumping rate according to the requirements of the flooring application.
The D6528 also incorporates long-lasting pumping tubes as part of its pumping system. Proper cleaning, operation, maintenance, and material compatibility are important for achieving reliable equipment performance.
D6528 for Gypsum Flooring
The D6528 is a popular solution for gypsum flooring applications because it combines field batching and pumping capabilities in one machine.
Gypsum flooring work can require efficient mixing followed by controlled material delivery. The D6528's hydraulic mixer prepares the material, while the receiving hopper and squeeze pump provide the transition from batching to pumping.
With a maximum output of 12 cubic yards per hour, the machine provides a production-oriented option for suitable gypsum flooring projects.
Actual material compatibility and pumping requirements should be confirmed before using the equipment for a specific application.
D6528 Output Capacity
The D6528 provides a variable pumping output of:
0–12 cubic yards per hour
This adjustable output allows the operator to control the material delivery rate rather than operating at one fixed pumping speed.
Variable-speed operation can be useful when flooring conditions, placement requirements, or production rates change during a project.
D6528 Specifications
Specification D6528
Length 204 inches
Width 88 inches
Water Tank Height 89 inches
Mixer Height – Dump Position 86 inches
Charging Height 48 inches
Output Capacity 0–12 cubic yards per hour
Mixer Capacity 9 cubic feet
Receiving Hopper Capacity 12 cubic feet
These specifications can help contractors assess transportation, jobsite access, and production requirements before selecting the equipment.
Power Options for the D6528
The D6528 is available with two primary power configurations.
Kubota V1505 29 HP Water-Cooled Diesel
The diesel configuration uses a Kubota V1505 29 HP water-cooled diesel engine. This option can be useful for jobsites where electrical power is limited or unavailable.
30 HP Electric Motor
The D6528 is also available with a 30 HP electric motor with starter and disconnect for applications where electrical power is available and preferred.
These power options allow contractors to select a configuration appropriate for their operating environment.
Key Features of the D6528
The D6528 includes several features designed to support field batching and pumping:
9-cubic-foot hydraulic spiral mixer
Hydraulic mixer dump
Hydraulic mixer clean-out door
12-cubic-foot receiving hopper
Hydraulic hopper agitator
3-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
Variable output from 0–12 cubic yards per hour
Long-lasting pumping tubes
Diesel and electric power options
Together, these features create an integrated mixing and pumping system for suitable flooring and field-batching applications.
Options for a Flexible Jobsite Setup
The D6528 can be configured with several optional accessories to meet different jobsite needs.
Available options include:
Pendant or wireless remote
150-gallon water tank with 2-inch flow meter
Mounted spare tire
Hydraulic pressure washer
Dual axles
Mounted air compressor
These options can provide additional flexibility for transportation, cleaning, water management, and machine operation.
Benefits of a Hydraulic Mixer and Pump for Flooring
Choosing a hydraulic mixer and pump for flooring can provide several practical advantages when the equipment is properly matched to the application.
Integrated Mixing and Pumping
The D6528 combines material preparation and pumping into one machine, simplifying the workflow between batching and placement.
Variable Pumping Speed
The hydraulic squeeze pump can operate from 0 to 12 cubic yards per hour, providing adjustable material delivery.
Multiple Power Choices
The diesel and electric configurations allow contractors to choose a suitable power source for their jobsite.
Large Mixer and Hopper Capacities
The 9-cubic-foot mixer and 12-cubic-foot receiving hopper provide dedicated capacity for mixing and material handling.
Jobsite Configuration Options
Remote controls, water tanks, dual axles, pressure washers, and other options allow the machine to be configured according to project needs.
Choosing a Portable Gypsum Flooring Mixer Pump
When evaluating a portable gypsum flooring mixer pump, contractors should consider more than pumping capacity. Important factors include:
Required production rate
Material compatibility
Mixer capacity
Hopper capacity
Pump configuration
Available power
Transportation requirements
Jobsite access
Cleaning and maintenance needs
Available accessories
The D6528 offers a combination of a 9-cubic-foot hydraulic mixer, 12-cubic-foot receiving hopper, and variable-speed 3-inch squeeze pump.
Why Consider the D6528?
The D6528 hydraulic mixer and pump for flooring provides an integrated approach to field batching and pumping. Its hydraulic spiral mixer prepares the material, the receiving hopper manages the mixed material, and the hydraulic squeeze pump delivers it at an adjustable rate.
For contractors seeking a portable gypsum flooring mixer pump for suitable field applications, the D6528 offers flexible power configurations, multiple available options, and output capacity of up to 12 cubic yards per hour.
Its combination of mixing, material handling, and pumping functions makes the D6528 a practical equipment solution for contractors working on compatible gypsum flooring and other field-batching projects.
Get More Information About the D6528
The D6528 Mixer/Pump is designed for field batching and pumping with a maximum output of 12 cubic yards per hour. Its hydraulic mixer, receiving hopper, and squeeze pump provide an integrated system for suitable flooring applications.
D6528 Hydraulic Mixer and Pump for Flooring Applications
