Choosing the right equipment for gypsum flooring projects can have a major impact on job-site productivity and material placement. Contractors need a system that can efficiently mix materials, maintain a steady supply, and pump the material where it is needed.
The Blastcrete D6528 Mixer/Pump is designed for field batching and pumping applications with output of up to 12 cubic yards per hour. With its integrated hydraulic mixer, receiving hopper, and squeeze pump, the D6528 is a strong option for contractors looking for the best mixer pump for gypsum flooring applications.
D6528: A Reliable Gypsum Mixer Pump
The D6528 combines mixing and pumping functions into one machine. It features a 9 cubic foot hydraulic spiral mixer that hydraulically dumps material into a 12 cubic foot receiving hopper.
From the hopper, material is pumped through a 3-inch hydraulic squeeze pump. The pump provides variable output from 0 to 12 cubic yards per hour, allowing operators to adjust the pumping rate to match project requirements.
For contractors searching for a reliable gypsum mixer pump, this integrated design provides a straightforward process from field batching to material placement.
Why Choose the D6528 for Gypsum Flooring?
Gypsum flooring projects can require consistent material production and reliable pumping throughout the application process. The D6528 is designed to bring these functions together in a single piece of equipment.
The machine can help contractors streamline their workflow by:
Mixing material directly at the job site
Hydraulically transferring mixed material to the receiving hopper
Maintaining material movement with a hydraulic agitator
Pumping material through a 3-inch squeeze pump
Adjusting output from 0 to 12 cubic yards per hour
Supporting continuous material placement
This combination makes the D6528 particularly well suited to gypsum flooring applications where dependable material delivery is important.
9 Cubic Foot Hydraulic Spiral Mixer
The D6528 is equipped with a 9 cubic foot hydraulic spiral mixer for field batching. The mixer features a hydraulic dump system that transfers the mixed material directly into the receiving hopper.
A clean-out door is also included to help simplify equipment maintenance after use.
The hydraulic design allows the mixer to be integrated efficiently with the rest of the D6528 system, creating a direct path from material preparation to pumping.
12 Cubic Foot Receiving Hopper
After mixing, material is discharged into the D6528's 12 cubic foot receiving hopper.
The hopper includes a hydraulic agitator that helps maintain material movement before it reaches the pump. This is an important part of the machine's integrated material-handling process.
By combining a 9 cubic foot mixer with a 12 cubic foot receiving hopper, the D6528 is designed to provide an efficient transition between batching and pumping.
3-Inch Hydraulic Squeeze Pump
The D6528 uses a 3-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
Its variable-speed operation allows pumping rates from 0 to 12 cubic yards per hour. This gives contractors the ability to adjust material flow according to the requirements of the gypsum flooring application.
The D6528 also uses long-lasting pumping tubes designed to support dependable operation and reduce equipment maintenance concerns.
Reliable Performance for Gypsum Flooring
When evaluating a reliable gypsum mixer pump, contractors often look for equipment that is simple to operate, easy to maintain, and capable of delivering consistent output.
The D6528 is designed with several features intended to support practical job-site operation, including:
Hydraulic mixer dumping
Hydraulic hopper agitation
Variable-speed pumping
Heavy-duty planetary gearbox
3-inch squeeze pump
Mixer clean-out door
Diesel and electric power options
Optional remote controls
These features make the D6528 a practical choice for contractors handling gypsum flooring and other compatible material-pumping applications.
D6528 Output Capacity
The D6528 provides an output range of 0 to 12 cubic yards per hour. Variable output allows operators to control the pumping rate instead of being limited to a single fixed speed.
This flexibility can be useful on gypsum flooring projects where material placement rates may change throughout the job.
Whether the project requires a slower controlled flow or higher-volume pumping, the D6528 can be adjusted within its specified operating range.
Diesel and Electric Power Options
The D6528 is available with two power configurations, giving contractors flexibility when selecting equipment for their operating environment.
Kubota V1505 Diesel
The diesel version is equipped with a Kubota V1505 29 HP water-cooled diesel engine. This configuration can be useful for field applications where an independent power source is preferred.
30 HP Electric Motor
The electric version features a 30 HP electric motor with starter and disconnect. This configuration can be suitable for projects where the necessary electrical service is available.
Both configurations are designed around the same D6528 mixing and pumping system.
D6528 Specifications
Specification D6528
Length 204 inches
Width 88 inches
Water Tank Height 89 inches
Mixer Height, Dump Position 86 inches
Charging Height 48 inches
Output Capacity 0–12 cubic yards per hour
Mixer Capacity 9 cubic feet
Receiving Hopper Capacity 12 cubic feet
Pump 3-inch hydraulic squeeze pump
Optional Features for the D6528
The D6528 can be equipped with additional options to meet different job-site requirements.
Available options include:
Pendant or wireless remote
150-gallon water tank with 2-inch flow meter
Spare tire mounted
Hydraulic pressure washer
Dual axles
Mounted air compressor
These options allow contractors to configure the equipment for specific transportation, cleaning, water-management, and operating requirements.
What Makes the D6528 a Strong Choice?
The best mixer pump for gypsum flooring is equipment that can efficiently combine mixing and pumping while providing operators with practical control over material delivery.
The D6528 offers:
9 cubic foot hydraulic spiral mixer
12 cubic foot receiving hopper
3-inch hydraulic squeeze pump
0–12 cubic yards per hour variable output
Hydraulic mixer dump
Hydraulic hopper agitator
Heavy-duty planetary gearbox
Diesel or electric power options
Multiple equipment options
Design suited to gypsum flooring applications
Its integrated design reduces the need to manage separate mixing and pumping equipment, creating a more streamlined process for field batching and material placement.
D6528 for Commercial Gypsum Flooring Projects
Commercial gypsum flooring projects often involve large areas and demanding production schedules. Equipment needs to support a steady workflow from material preparation through pumping and placement.
The D6528 provides a single-machine solution for these operations. Material is mixed in the 9 cubic foot hydraulic spiral mixer, transferred to the 12 cubic foot receiving hopper, and then pumped through the 3-inch squeeze pump.
For contractors looking for a reliable gypsum mixer pump, the D6528 offers a combination of mixing capacity, variable pumping output, and hydraulic operation designed for demanding field applications.
Choose the D6528 Mixer/Pump
The Blastcrete D6528 is designed for contractors who need an integrated mixer and pump for gypsum flooring and other field-batching applications. Its hydraulic mixing system, large receiving hopper, variable-speed squeeze pump, and flexible power options make it a versatile piece of equipment.
If you are comparing options for the best mixer pump for gypsum flooring, the D6528 provides a practical combination of mixing and pumping capabilities in one machine.
D6528: Best Mixer Pump for Gypsum Flooring Applications
