Steel plants and foundries operate in some of the most demanding industrial environments, where refractory linings help protect furnaces, vessels, ladles, chutes, and other high-temperature equipment. Efficient refractory installation and repair require equipment capable of consistently mixing and delivering refractory materials.
The Blastcrete MX-20CM is a mixer/pump designed for refractory placement applications. As a refractory pump for steel plants and refractory pump for foundries, the MX-20CM combines a high-shear continuous mixer, secondary mixer, and 4-inch high-pressure swing tube piston pump in one system.
The machine is designed for applications ranging from approximately 2–3 tons per hour to high-volume installations of up to 25 tons per hour.
MX-20CM Refractory Pump for Steel Plants
Steel production involves high-temperature equipment that may require regular refractory installation and maintenance. Refractory materials are commonly used to protect equipment from heat, abrasion, and demanding operating conditions.
The MX-20CM provides an integrated mixing and pumping system that can support suitable refractory applications in steelmaking environments.
Potential applications include:
Steel plant furnace refractory work
Furnace lining installation
Refractory repair
Pump-cast refractory placement
Shotcrete applications
Ladle refractory maintenance
Industrial refractory installation
High-volume refractory projects
General steel plant maintenance
The appropriate refractory material and installation process should always be selected according to the equipment manufacturer's and refractory manufacturer's requirements.
Refractory Pump for Foundries
Foundries use furnaces and other high-temperature equipment that require durable refractory protection. During maintenance and repair, contractors may need equipment capable of preparing and pumping refractory materials efficiently.
The MX-20CM refractory pump for foundries combines material mixing and pumping into one machine.
It can support suitable applications such as:
Foundry furnace repair
Furnace refractory lining
Refractory castable placement
Furnace relining
Pump-cast refractory installation
Shotcrete refractory work
High-temperature equipment maintenance
The MX-20CM's stated output range provides flexibility for both smaller repair projects and larger refractory installations.
Two-Stage Mixing Technology
One of the main features of the MX-20CM is its two-stage mixing system.
High-Shear Continuous Mixer
The primary mixer is a compact high-shear continuous mixer where refractory material is hydrated.
The mixer has a stated output of up to 25 tons per hour.
Secondary Mixer
A medium-shear secondary mixer is mounted in the receiving hopper of the 4-inch pump.
The two-stage arrangement allows material to pass through a continuous preparation process before entering the high-pressure pumping system.
Material Flow
The operating sequence can be summarized as:
Dry Material → Primary High-Shear Mixer → Secondary Mixer → Receiving Hopper → Swing Tube Pump → Refractory Placement
This integrated approach can help simplify material handling on steel plant and foundry projects.
High-Pressure Swing Tube Pump
The MX-20CM uses a 4-inch x 36-inch ultra-high-pressure swing tube piston pump.
The pump is designed for rugged refractory pump-cast and shotcrete applications.
Pump Specifications
Pump output: 0–25 tons/hour
Piston face pressure: 2,200 PSI
Pump dimensions: 4" x 36"
Ultra-high-pressure swing tube design
Hydraulic receiving hopper agitator
Swing-out receiving hopper
The pump incorporates oversized differential cylinders, allowing high discharge pressure while requiring comparatively lower hydraulic pressure for operation.
Steel Plant Refractory Applications
Steel plant refractory systems can require installation and repair in demanding locations. An integrated mixer/pump can provide a practical approach to material preparation and delivery for suitable applications.
The MX-20CM can be considered for projects involving:
Furnace Refractory
The machine can support suitable pump-cast and shotcrete refractory applications around industrial furnaces.
Ladle Maintenance
Where the selected refractory material and installation method are compatible, the equipment can support refractory maintenance work involving steelmaking ladles.
High-Temperature Equipment
The machine can also be used for suitable refractory installation and repair applications involving other high-temperature steel plant equipment.
Actual suitability depends on the refractory product, installation technique, pumping distance, and jobsite conditions.
Foundry Furnace Refractory Installation
Foundry furnace maintenance may require periodic refractory repair or replacement.
The MX-20CM's integrated mixer and pump can help provide a continuous material preparation and delivery process.
Benefits can include:
Continuous material mixing
High-pressure pumping
Flexible production rates
Reduced material transfers
Integrated material handling
Easier equipment cleaning and servicing
Swing-Out Receiving Hopper
Steel plants and foundries require equipment that can be maintained efficiently between jobs.
The MX-20CM features a swing-out receiving hopper that provides easier access to the swing tube section.
This can make it easier to perform:
Cleaning
Inspection
Pump maintenance
Swing tube servicing
Material removal
Forklift tubing mounted to the lower hopper also supports flat-pack removal.
Reduced Dust and Faster Cleanup
Charging a continuous mixer can generate dust, particularly when handling dry materials.
The MX-20CM is designed to minimize dust generated during charging. The supplied manufacturer information also states that cleanup of the continuous mixer is quicker and generates very little waste.
These features can be valuable for contractors moving between multiple refractory repair projects.
MX-20CM Production Capacity
The MX-20CM is designed to handle both smaller and larger refractory installation projects.
Small Applications
The machine can be used for smaller refractory installations at approximately 2–3 tons per hour.
High-Volume Applications
The machine has a stated maximum output of up to 25 tons per hour.
This range can make the MX-20CM suitable for contractors working across different steel plant and foundry project sizes.
MX-20CM Power Options
The machine is available with multiple power configurations.
Diesel Power
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Electric Power
Dual electric motors
The machine's two-stage mixer and pump system is designed to require approximately 100 HP.
The supplied manufacturer information states that fuel consumption can be reduced by up to 50% compared with competitive machines. Actual fuel consumption varies according to operating conditions, material, workload, and configuration.
MX-20CM Specifications
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High-Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper Capacity 3,000 lb
Receiving Hopper Capacity 1,500 lb
Hopper Agitator Hydraulic
Flow Meter 0–20 gallons
Crane Pickup Four-point pickup
Trailer Axles Dual 6,000 lb capacity
Dimensions 220" x 89" x 108"
Weight 7,500 lb
Certification CE
Key Features for Steel Plants and Foundries
The MX-20CM refractory pump for steel plants and foundries includes:
4-inch x 36-inch swing tube piston pump
2,200 PSI piston face pressure
High-shear continuous mixer
Up to 25 tons/hour mixer output
Up to 25 tons/hour pump output
Two-stage mixing system
Swing-out receiving hopper
Hydraulic hopper agitator
0–20 gallon flow meter
Solid-state electronic controls
Four-point crane pickup
Dual 6,000 lb trailer axles
Electric braking and lights
CE certification
Optional Equipment
The MX-20CM can be equipped with several optional features:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Mounted spare tire
Pendant remote
Skid-mounted configuration
Forklift tubing
These options can provide additional flexibility for cleaning, maintenance, transportation, and jobsite operation.
Transport and Jobsite Flexibility
The MX-20CM has a stated towing weight of 7,500 pounds.
The trailer incorporates dual 6,000-pound-capacity axles with electric braking and lights.
A four-point crane pickup is also provided, with no spreader bar required.
The supplied specifications state that no special license is needed to tow the equipment. Local towing, transportation, and licensing requirements should always be confirmed before transporting the machine on public roads.
Benefits of the MX-20CM Refractory Pump
Integrated System
Mixing and pumping are combined into one machine.
High Output
The mixer and pump are each rated for up to 25 tons per hour.
High-Pressure Pumping
The 4-inch swing tube piston pump provides 2,200 PSI piston face pressure.
Flexible Applications
The equipment can support suitable pump-cast and shotcrete refractory applications.
Easier Maintenance
The swing-out receiving hopper provides access to the pump section for cleaning and service.
Multiple Power Configurations
Diesel and electric power options are available.
Why Choose MX-20CM for Steel Plant and Foundry Refractory Work?
For contractors searching for a refractory pump for steel plants or a refractory pump for foundries, the MX-20CM provides a combined mixing and pumping solution.
Its high-shear continuous mixer prepares the material, the secondary mixer provides additional processing, and the 4-inch swing tube piston pump delivers the prepared material for suitable refractory placement applications.
With a stated maximum output of 25 tons per hour, the MX-20CM can support both smaller maintenance projects and high-volume refractory installations.
The Blastcrete MX-20CM is designed to combine continuous high-shear mixing and high-pressure pumping for refractory placement.
For steel plants, foundries, industrial furnaces, and other high-temperature facilities, the MX-20CM refractory pump for steel plants and refractory pump for foundries provides an integrated approach to refractory material preparation and delivery.
Its two-stage mixing system, 4-inch x 36-inch swing tube piston pump, 2,200 PSI piston face pressure, swing-out receiving hopper, multiple power options, and stated capacity of up to 25 tons per hour make it a versatile option for suitable refractory installation and repair projects.
Refractory Pump for Steel Plants and Foundries: MX-20CM Mixer/Pump
