The MX-20CM is an industrial mixer/pump designed for efficient refractory placement, pump casting, and shotcrete applications. Its integrated high-shear continuous mixer and powerful 4 inch swing tube pump provide a complete solution for projects ranging from smaller refractory installations to high-volume operations.
With pumping capacity of up to 25 tons per hour and a 2,200 PSI piston face pressure, the MX-20CM is designed for demanding industrial material placement applications.
4 x 36 Swing Tube Pump for Industrial Applications
The MX-20CM features a 4" x 36" swing tube piston pump, combining a large pumping section with high piston pressure for rugged refractory and shotcrete work.
The pump is engineered with oversized differential cylinders, allowing it to achieve high discharge pressure while requiring comparatively lower hydraulic operating pressure. This design contributes to efficient operation and supports consistent material delivery.
For businesses searching for a 4 inch swing tube pump or 4 x 36 swing tube pump, the MX-20CM provides both high-pressure pumping and continuous material mixing in one integrated machine.
High-Output Mixing and Pumping
One of the key advantages of the MX-20CM is its two-stage mixing configuration. A high-shear primary continuous mixer hydrates the material before it enters the secondary mixer located in the receiving hopper.
Both the mixer and pump are rated for output of up to 25 tons per hour, giving the equipment flexibility for different project sizes.
The system is suitable for applications including:
Refractory placement
Refractory pump casting
Shotcrete applications
Industrial refractory installation
Furnace and kiln lining work
High-volume material placement
Easy Swing-Out Hopper Maintenance
The receiving hopper incorporates a swing-out design that provides convenient access to the swing tube section. This makes cleaning and routine maintenance easier.
The lower hopper also incorporates forklift tubing for flat-pack removal, while the four-point crane pickup allows the machine to be lifted without a spreader bar.
These design features can help reduce service time and simplify equipment handling at industrial job sites.
MX-20CM Pump and Mixer Specifications
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper Capacity 3,000 lb.
Receiving Hopper Capacity 1,500 lb.
Receiving Hopper Hydraulic Agitator
Flow Meter 0–20 gallons
Dimensions 220" x 89" x 108"
Weight 7,500 lb.
Trailer Dual 6,000 lb. capacity axles
Certification CE
Power Options
The MX-20CM can be configured with several power options:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
The machine's approximately 100 HP power requirement is designed to provide efficient mixer and pump operation. The manufacturer states that its two-stage mixer and oversized differential-cylinder design can lower fuel consumption by up to 50% compared with competitive machines.
Additional Features and Options
Standard features include reliable solid-state electronic controls, a 0–20 gallon flow meter, overhead crane pickup, forklift tubing, and a swing-out receiving hopper.
Available options include:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Spare tire
Pendant remote
Skid mounting with forklift tubing
The MX-20CM combines a 4 inch swing tube pump, high-shear continuous mixer, and high-pressure piston pumping system into one industrial machine. Its maximum 25-ton-per-hour capacity makes it suitable for both smaller refractory projects and high-volume installations.
For contractors and industrial operators looking for a 4 x 36 swing tube pump, refractory mixer/pump, or high-pressure material placement system, the MX-20CM offers a compact and serviceable configuration designed around demanding refractory and shotcrete applications.
4 Inch Swing Tube Pump: MX-20CM for High-Performance Refractory Placement
