The MX-20CM is an integrated mixer/pump designed for demanding refractory placement and industrial material handling applications. By combining a continuous refractory mixer with a high-pressure swing tube pump, the machine can mix, hydrate, and deliver refractory materials through one compact system.
With mixer and pump output of up to 25 tons per hour, the MX-20CM can support both smaller refractory installations and high-volume industrial projects.
High-Performance Continuous Refractory Mixer
The MX-20CM uses a two-stage mixing system. Its primary high-shear continuous mixer hydrates the material before transferring it to a secondary medium-shear mixer mounted in the receiving hopper.
This configuration is designed to provide efficient material preparation while maintaining a continuous flow into the pumping system. The mixer is rated for output of up to 25 tons per hour, making it suitable for demanding refractory applications.
For companies searching for a continuous refractory mixer or continuous material mixer, the MX-20CM combines continuous mixing and pumping capabilities in a single machine.
Continuous Material Mixer and Pump System
Instead of relying on separate mixing and pumping equipment, the MX-20CM integrates both functions. After the material is hydrated in the primary mixer, it moves into the receiving hopper and secondary mixer before entering the 4-inch swing tube pump.
This arrangement can help streamline the material placement process for applications such as:
Refractory installation
Refractory lining work
Industrial furnace applications
Kiln lining projects
Pump casting
Shotcrete applications
High-volume refractory placement
High-Shear Mixing Technology
The primary mixer uses high-shear mixing to prepare and hydrate the material. A secondary medium-shear mixer in the receiving hopper provides additional mixing before pumping.
The two-stage approach is designed to reduce material waste and simplify cleanup. The manufacturer also states that dust generated while charging the continuous mixer is greatly reduced.
25 Ton Per Hour Capacity
The MX-20CM provides a maximum mixer output of 25 tons per hour, while the pump is also rated at up to 25 tons per hour.
This gives contractors flexibility to handle projects requiring relatively low production rates as well as high-volume refractory installation.
MX-20CM Mixer and Pump Specifications
Specification MX-20CM
Mixer High Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Dry Hopper Capacity 3,000 lb.
Receiving Hopper Capacity 1,500 lb.
Receiving Hopper Hydraulic Agitator
Flow Meter 0–20 gallons
Dimensions 220" x 89" x 108"
Weight 7,500 lb.
Certification CE
Designed for Easier Cleaning and Maintenance
The MX-20CM incorporates a swing-out receiving hopper that provides easier access to the swing tube section for cleaning and maintenance.
Forklift tubing on the lower hopper also facilitates flat-pack removal. A four-point overhead crane pickup allows the machine to be lifted without a spreader bar.
These features are particularly useful for industrial operations where equipment accessibility and maintenance time are important considerations.
Efficient Power Configuration
The MX-20CM is available with multiple power options:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
The manufacturer states that the efficient two-stage mixer and oversized differential-cylinder design allows the machine to operate with approximately 100 HP and can reduce fuel consumption by up to 50% compared with competitive machines.
MX-20CM Features
Key features include:
High-shear continuous mixer
Up to 25 tons/hour mixer output
Up to 25 tons/hour pump output
4" x 36" swing tube piston pump
2,200 PSI piston face pressure
Swing-out receiving hopper
0–20 gallon flow meter
Solid-state electronic controls
Four-point crane pickup
Forklift tubing
CE certification
Dual 6,000 lb. trailer axles with electric brakes and lights
Available Options
The MX-20CM can also be equipped with several options depending on project requirements, including a 2,000 PSI hydraulic pressure washer, Vogel automatic lubrication system, spare tire, pendant remote, and skid mounting with forklift tubing.
The MX-20CM brings continuous mixing, hydration, and high-pressure pumping together in one industrial machine. Its 25-ton-per-hour capacity, two-stage mixing system, and 4-inch swing tube pump make it suitable for a wide range of refractory and shotcrete applications.
For businesses searching for a continuous refractory mixer, continuous material mixer, high-capacity refractory mixer, or integrated mixer/pump system, the MX-20CM provides a versatile solution for continuous material preparation and placement.
Continuous Refractory Mixer: MX-20CM for Efficient Material Preparation and Placement
