When selecting refractory equipment for sale, industrial contractors need equipment that can provide reliable material mixing, efficient pumping, and practical maintenance. The MX-20CM is an integrated mixer/pump designed for refractory placement, combining a high-shear continuous mixer with a high-pressure swing tube piston pump.
The machine is suitable for smaller refractory installations as well as high-volume projects, with mixer and pump output of up to 25 tons per hour.
MX-20CM Refractory Installation Machine
The MX-20CM features a compact two-stage mixing system. Its primary high-shear continuous mixer hydrates the material before transferring it to a secondary medium-shear mixer mounted inside the receiving hopper.
The prepared material then enters the 4-inch high-pressure swing tube pump for placement.
This integrated configuration makes the MX-20CM suitable for applications such as:
Furnace refractory installation
Kiln lining and repair
Industrial refractory maintenance
Refractory casting
Pump casting
Shotcrete placement
High-volume refractory installation
Industrial lining projects
For companies researching a refractory installation machine for sale, the MX-20CM combines mixing and pumping functions into one mobile system.
High-Capacity Refractory Equipment
The MX-20CM is designed to handle a wide range of production requirements. It can be used for smaller installations of approximately 2–3 tons per hour and can reach a maximum output of 25 tons per hour.
The high-shear continuous mixer is also rated for up to 25 tons per hour, helping maintain a continuous material preparation process.
Key Production Specifications
Specification MX-20CM
Mixer High Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Dry Hopper 3,000 lb.
Receiving Hopper 1,500 lb.
Receiving Hopper Agitator Hydraulic
Flow Meter 0–20 gallons
2,200 PSI Swing Tube Piston Pump
A major component of the MX-20CM is its 4" x 36" swing tube piston pump, which provides a piston face pressure of 2,200 PSI.
The pump uses oversized differential cylinders, allowing high discharge pressure while requiring comparatively lower hydraulic pressure to operate. This configuration is designed for demanding refractory pump casting and shotcrete applications.
Two-Stage Mixing for Refractory Placement
The MX-20CM's two-stage mixer is designed to improve material preparation before pumping.
The primary high-shear continuous mixer performs the initial hydration, while the secondary mixer provides additional mixing in the receiving hopper.
According to the supplied manufacturer information, the system also reduces dust generated during charging and can make cleanup faster while producing relatively little waste.
Designed for Easy Maintenance
When purchasing refractory equipment for sale, maintenance and accessibility are important considerations. The MX-20CM includes a swing-out receiving hopper that provides convenient access to the swing tube section.
Other maintenance and handling features include:
Swing-out receiving hopper
Forklift tubing for flat-pack removal
Four-point overhead crane pickup
No spreader bar required for crane pickup
Solid-state electronic controls
0–20 gallon flow meter
The machine also has a towing weight of approximately 7,500 pounds.
Power Options
The MX-20CM is available with multiple power configurations:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
The supplied product information states that the machine requires approximately 100 HP and that its efficient two-stage mixer and oversized differential design can reduce fuel consumption by up to 50% compared with competitive machines.
MX-20CM Dimensions and Trailer
The MX-20CM measures approximately 220" x 89" x 108" and weighs 7,500 pounds.
Its trailer incorporates dual 6,000-pound-capacity axles with electric braking and lights. The machine is also CE certified.
Available Options
Customers can configure the MX-20CM with additional equipment, including:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Spare tire
Pendant remote
Skid mounting with forklift tubing
Why Choose the MX-20CM?
The MX-20CM provides an integrated solution for companies requiring a refractory installation machine for sale. Its continuous high-shear mixer, 4-inch swing tube piston pump, 2,200 PSI piston pressure, and maximum 25-ton-per-hour output make it suitable for a broad range of refractory and shotcrete applications.
Rather than using separate mixing and pumping equipment, the MX-20CM combines both processes into one machine, helping simplify material preparation and placement at industrial job sites.
For contractors and industrial operators searching for refractory equipment for sale, the MX-20CM offers a high-capacity mixer/pump configuration designed for refractory placement, furnace and kiln lining, maintenance, casting, and shotcrete work.
Refractory Equipment for Sale: MX-20CM Refractory Installation Machine
