When planning a refractory installation, choosing the right mixer/pump can have a major impact on productivity, material handling, operating efficiency, and maintenance. The Blastcrete MX-20CM Mixer/Pump is designed for refractory placement applications ranging from smaller installations to high-volume projects.
If you are researching MX-20CM price information, the best approach is to request a current quotation based on the machine configuration, power option, and selected accessories.
MX-20CM Mixer/Pump for Refractory Applications
The MX-20CM combines a high-shear continuous mixer with a 4-inch high-pressure swing tube piston pump. Its two-stage mixing system is designed to hydrate material efficiently before it enters the receiving hopper and pumping system.
The machine can handle applications from approximately 2–3 tons per hour through a maximum output of 25 tons per hour, making it suitable for both smaller refractory projects and demanding industrial installations.
A key advantage of the MX-20CM is its integrated design. The primary continuous mixer performs high-shear mixing, while a secondary mixer mounted in the receiving hopper helps maintain material consistency before pumping.
Why Request an MX-20CM Quote?
The final MX-20CM quote can vary depending on the configuration selected. Available power options include diesel and electric drive systems, while additional equipment can be specified according to project requirements.
For an accurate current price, buyers should provide their preferred configuration and application requirements when requesting a quotation.
Request an MX-20CM Quote
High-Pressure Pumping Performance
The MX-20CM incorporates a 4" x 36" swing tube piston pump with a stated piston face pressure of 2,200 PSI. The pump is intended for demanding refractory pump-cast and shotcrete applications.
The oversized differential cylinders allow the pump to operate with lower hydraulic pressure while maintaining high discharge pressure. This design contributes to the machine's heavy-duty pumping capability.
Key Pump Specifications
Pump type: 4" x 36" ultra-high-pressure swing tube pump
Pump output: 0–25 tons per hour
Piston face pressure: 2,200 PSI
Receiving hopper capacity: 1,500 lb.
Hydraulic agitator in receiving hopper
High-Shear Continuous Mixing
The MX-20CM uses a high-shear continuous mixer capable of output up to 25 tons per hour. The two-stage mixing arrangement is designed to improve material hydration while reducing dust and minimizing cleanup and material waste.
The dry hopper has a 3,000 lb. capacity, providing substantial material storage for continuous operation.
This makes the MX-20CM particularly useful when consistent material preparation and high production rates are important considerations.
MX-20CM Features
The machine includes several features intended to simplify operation, transportation, cleaning, and maintenance:
4" x 36" swing tube piston pump
2,200 PSI piston face pressure
High-shear continuous mixer
Up to 25 tons per hour mixer output
Swing-out receiving hopper
Forklift tubing for flat-pack removal
0–20 gallon flow meter
Solid-state electronic controls
Four-point overhead crane pickup
Dual 6,000-lb.-capacity axles
Electric trailer brakes and lights
CE certification
No special license needed to tow, according to the supplied specifications
MX-20CM Specifications
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High-Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper 3,000 lb.
Receiving Hopper 1,500 lb. with hydraulic agitator
Dimensions 220" x 89" x 108"
Weight 7,500 lb.
Trailer Dual 6,000-lb. axles
Crane Pickup Four-point pickup
Power Options
The MX-20CM is available with several power configurations:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
Selecting the appropriate power configuration can depend on the availability of site power, mobility requirements, operating environment, and project conditions.
Available Options
Additional equipment can be selected to adapt the machine to specific jobsite requirements:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Mounted spare tire
Pendant remote
Skid mounting with forklift tubing
What Determines MX-20CM Price?
There is no single universal MX-20CM price stated in the supplied specifications. The purchase cost can depend on the selected power system, optional equipment, configuration, shipping, and other project requirements.
MX-20CM Price & Quote Guide: High-Performance Mixer/Pump for Refractory Placement
