Finding the right equipment is an important step when planning refractory installation work. A reliable mixer/pump needs to provide consistent material preparation, adequate pumping pressure, and enough production capacity for the project.
The Blastcrete MX-20CM Mixer/Pump combines a high-shear continuous mixer with a 4-inch high-pressure swing tube piston pump. It is designed for refractory applications ranging from smaller installations of approximately 2–3 tons per hour to high-volume production of up to 25 tons per hour.
If you are looking to buy a refractory mixer pump, the MX-20CM offers an integrated solution for mixing, hydrating, and pumping refractory materials.
MX-20CM: Mixer and Pump in One Machine
The MX-20CM uses a two-stage mixing system. The primary high-shear continuous mixer hydrates the material before it reaches a secondary medium-shear mixer mounted in the receiving hopper.
This arrangement allows continuous material preparation while feeding the 4-inch swing tube pump. The mixer has a rated output of up to 25 tons per hour, matching the pump's maximum output.
For contractors handling different project sizes, this range provides flexibility without requiring a separate machine for every production requirement.
High-Pressure Refractory Pump
The MX-20CM features a 4-inch x 36-inch ultra-high-pressure swing tube piston pump with a piston face pressure of 2,200 PSI.
Key pumping specifications include:
Pump output: 0–25 tons per hour
4-inch x 36-inch swing tube
2,200 PSI piston face pressure
Hydraulic receiving-hopper agitator
Oversized differential cylinders
The pump is designed for demanding refractory pump casting and shotcrete applications.
What to Consider Before You Buy a Refractory Mixer Pump
Before purchasing a refractory mixer pump, consider several factors.
1. Required Production Rate
Determine the typical and maximum material volume required for your projects. The MX-20CM can operate from approximately 2–3 tons per hour for smaller installations through a maximum rated output of 25 tons per hour.
2. Power Requirements
The MX-20CM is available with:
99 HP John Deere water-cooled diesel
102 HP Deutz water-cooled diesel
Dual electric motors
Your choice can depend on whether the equipment will operate at mobile jobsites or locations with suitable electrical infrastructure.
3. Transportation
The machine weighs approximately 7,500 pounds and incorporates a trailer with dual 6,000-pound-capacity axles, electric braking, and lights.
Its four-point crane pickup and forklift tubing can also simplify equipment handling.
4. Maintenance Access
Refractory material requires proper cleaning and maintenance procedures. The MX-20CM includes a swing-out receiving hopper that provides easier access to the swing tube section.
Optional equipment includes a 2,000 PSI hydraulic pressure washer and Vogel automatic lubrication system.
Looking for a Refractory Pump Supplier Near Me?
When searching for a refractory pump supplier near me, it is useful to confirm more than equipment availability. Ask about the machine configuration, power options, technical specifications, delivery arrangements, spare parts, and service support available for your location.
For the MX-20CM, buyers can contact the supplier directly for current pricing, availability, and configuration information rather than relying on an outdated online price.
MX-20CM Specifications
Specification MX-20CM
Pump 4" x 36" Ultra High Pressure Swing Tube Pump
Pump Output 0–25 tons/hour
Piston Face Pressure 2,200 PSI
Mixer High-Shear Continuous Mixer
Mixer Output 0–25 tons/hour
Dry Hopper 3,000 lb.
Receiving Hopper 1,500 lb.
Dimensions 220" x 89" x 108"
Weight 7,500 lb.
Trailer Dual 6,000 lb. axles
Controls Solid-state electronic
Flow Meter 0–20 gallons
MX-20CM Features
The machine includes several features intended to improve productivity and jobsite usability:
High-shear continuous mixer
4-inch x 36-inch swing tube piston pump
2,200 PSI piston face pressure
Up to 25 tons/hour mixer output
Up to 25 tons/hour pump output
Swing-out receiving hopper
3,000-pound dry hopper
1,500-pound receiving hopper
Hydraulic agitator
0–20 gallon flow meter
Solid-state electronic controls
Four-point crane pickup
Forklift tubing
CE certification
Optional Equipment
Depending on project requirements, the MX-20CM can be supplied with additional options such as:
2,000 PSI hydraulic pressure washer
Vogel automatic lubrication system
Spare tire
Pendant remote
Skid mounting with forklift tubing
These options can help adapt the equipment to different transportation, maintenance, and operating requirements.
Why the MX-20CM Can Be a Practical Choice
The MX-20CM integrates mixing and pumping into one machine rather than requiring separate primary equipment for each operation. Its two-stage continuous mixing system prepares material for a high-pressure swing tube piston pump, while its trailer-mounted design supports transportation between suitable job locations.
For high-volume refractory work, the 25-ton-per-hour maximum rated capacity provides substantial production capability. For smaller projects, the same machine can also operate at lower production rates.
Buy Refractory Mixer Pump: Choosing the Right MX-20CM for Refractory Installation
