Choosing the right power source is an important consideration when selecting concrete pumping equipment. The D3522 Pump offers multiple power configurations, including a 24 HP Honda gasoline engine and a 10 HP electric motor, along with a Kubota water-cooled diesel option.
With its compact 2-inch hydraulic squeeze pump, variable output of 0–6 cubic yards per hour, and pumping pressure of up to 400 PSI, the D3522 is designed for suitable concrete repair, epoxy, block fill, plaster, and stucco applications.
Honda Gasoline Concrete Pump
The D3522 can be configured as a Honda gasoline concrete pump using a 24 HP Honda gasoline engine.
A gasoline-powered configuration can be an option for job sites where an electric power supply is not readily available. Contractors can select this configuration based on their application, operating environment, and equipment requirements.
The D3522 combines the gasoline engine with a 2-inch hydraulic squeeze pumping system and a 6 cubic foot receiving hopper.
Electric Concrete Pump
The D3522 is also available as an electric concrete pump with a 10 HP electric motor.
An electric configuration can be considered for suitable job sites where an appropriate electrical power source is available.
When selecting the electric version, contractors should confirm that the available electrical supply and site conditions are appropriate for the equipment.
D3522 Pumping Performance
The D3522 provides variable output from 0–6 cubic yards per hour. This allows the operator to adjust the material delivery rate according to the application and material being pumped.
The supplied specifications list maximum pumping pressure at 400 PSI.
The pump has a 2-inch HD discharge and a 6 cubic foot receiving hopper.
D3522 Applications
The D3522 is designed for several suitable construction and repair applications.
Concrete Repair
The pump can be used for compatible concrete repair materials where controlled pumping is required.
Block Fill
The D3522 can support compatible block fill applications in masonry and construction projects.
Epoxy
The pump is suitable for specified epoxy applications when the material is compatible with the pumping system.
Plaster and Stucco
The machine can also be used for various plaster and stucco applications.
Material compatibility should always be confirmed before operating the pump with a particular product.
D3522 Pump Features
The D3522 includes several features designed for practical construction use:
2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
6 cubic foot receiving hopper
Variable output from 0–6 cubic yards per hour
Pumping pressure up to 400 PSI
Trailer or lower-profile skid configuration
Multiple engine and motor options
D3522 Specifications
Specification Details
Pump 2" D3522 Hydraulic Squeeze Pump
Pumping Pressure 400 PSI
Output 0–6 Cubic Yards Per Hour
Discharge 2" HD
Hopper 6 cu. ft.
Trailer Single 6,000 lb. capacity axle with electric braking and lights
Dimensions 166" × 88" × 54"
Weight 2,800 lbs.
D3522 Power Options
The D3522 offers three main power configurations:
Kubota Water-Cooled Diesel
The diesel option uses a Kubota water-cooled diesel engine and provides an alternative for contractors who prefer diesel-powered equipment.
24 HP Honda Gasoline Engine
The 24 HP Honda gasoline engine provides a gasoline-powered configuration for suitable applications.
10 HP Electric Motor
The 10 HP electric motor provides an electric configuration for job sites with a suitable electrical power supply.
Honda vs. Electric D3522 Pump
When choosing between a Honda gasoline concrete pump and an electric concrete pump, contractors should consider the conditions of the job site.
Consideration Honda Gasoline Electric
Power source 24 HP Honda gasoline engine 10 HP electric motor
Electrical supply Not required for engine operation Suitable electrical supply required
Mobility Suitable for mobile applications Depends on available power and setup
Job-site conditions Useful where gasoline-powered equipment is preferred Useful where electrical power is available
D3522 pump 2" hydraulic squeeze pump 2" hydraulic squeeze pump
The best choice depends on the project's operating environment and available power source.
D3522 Mounting Options
The D3522 can be supplied as a trailer-mounted machine or a lower-profile skid-mounted unit.
Trailer Mounted
The trailer configuration provides a mobile solution for contractors who need to move the pump between job sites.
The supplied trailer specification includes a single 6,000 lb. capacity axle with electric braking and lights.
Skid Mounted
The lower-profile skid configuration can be selected for applications where trailer mounting is not preferred. The skid-mounted version can include forklift tubing for equipment handling.
D3522 Optional Equipment
Additional options include:
Hydraulic receiving hopper agitator
Pendant or wireless remote
Spare tire mounted
Skid mounted with forklift tubing
Hydraulic pressure washer
Air compressor mounted
These options can help contractors configure the pump according to specific project requirements.
Choosing the Right D3522 Power Configuration
Before selecting a Honda gasoline concrete pump or electric concrete pump, consider:
Available power source – Determine whether gasoline or suitable electrical power is more practical.
Job-site location – Consider where the pump will operate.
Mobility requirements – Determine whether the equipment will move between locations.
Material requirements – Confirm compatibility with the intended material.
Output requirements – The D3522 provides 0–6 cubic yards per hour.
Mounting configuration – Choose trailer or skid mounting.
Optional accessories – Identify any additional equipment needed.
D3522 Pump for Construction and Repair
The D3522 provides contractors with a compact pumping system and multiple power options. The availability of a 24 HP Honda gasoline engine and 10 HP electric motor allows users to select a configuration that fits their job-site conditions.
With a 2-inch hydraulic squeeze pump, 6 cubic foot hopper, variable output of 0–6 cubic yards per hour, and up to 400 PSI pumping pressure, the D3522 can be evaluated for suitable concrete repair, epoxy, block fill, plaster, and stucco applications.
Honda Gasoline Concrete Pump and Electric Concrete Pump: D3522 Pump Power Options
