Construction and repair contractors need pumping equipment that can provide controlled material delivery while adapting to different job-site requirements. The Blastcrete D3522 Pump is a compact 2-inch hydraulic squeeze pump designed for suitable applications including concrete repair, epoxy, block fill, plaster, and stucco.
For contractors searching for a hydraulic squeeze pump for grout or a 2-inch pump for plaster and stucco, the D3522 offers variable-speed operation from 0–6 cubic yards per hour, with a specified pumping pressure of 400 PSI.
Hydraulic Squeeze Pump for Grout Applications
A hydraulic squeeze pump can be considered for suitable grout and construction-material pumping applications where the material meets the pump's compatibility requirements.
The D3522 features a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox. Its 6 cubic foot receiving hopper provides material capacity before pumping through the 2-inch HD discharge.
For grout applications, contractors should verify material compatibility, aggregate size, consistency, pumping distance, hose configuration, and other project-specific requirements before operation.
2-Inch Pump for Plaster and Stucco
The D3522 is designed for various suitable plaster and stucco applications.
Its 2-inch pumping system and variable-speed output can provide controlled material delivery for appropriate plaster and stucco materials. The required configuration will depend on the material characteristics and job-site conditions.
Potential Applications
The D3522 can be used for suitable applications involving:
Plaster
Stucco
Concrete repair
Block fill
Epoxy
Compatible grout and construction materials
Variable-Speed D3522 Pump
The D3522 has a variable output range of 0–6 cubic yards per hour.
Variable-speed operation allows the pumping rate to be adjusted according to the application and material requirements. Actual output can vary depending on material consistency, pumping distance, hose configuration, and operating conditions.
400 PSI Pumping Pressure
The D3522 has a specified 400 PSI pumping pressure.
The pump incorporates a 2-inch HD discharge and hydraulic squeeze-pump design for suitable construction materials. Contractors should ensure that the complete pumping setup is appropriate for the required pressure and material.
D3522 Pump Features
Key features of the D3522 include:
2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
6 cubic foot receiving hopper
Variable output from 0–6 cubic yards per hour
400 PSI pumping pressure
2-inch HD discharge
Trailer-mounted configuration
Lower-profile skid-mounted configuration
Multiple engine options
Optional pendant or wireless remote
D3522 Specifications
Specification Details
Pump 2" D3522 Hydraulic Squeeze Pump
Pumping Pressure 400 PSI
Output 0–6 Cubic Yards Per Hour
Discharge 2" HD
Hopper 6 cu. ft.
Trailer Single 6,000 lb. capacity axle with electric braking and lights
Dimensions 166" × 88" × 54"
Weight 2,800 lbs.
Power Options
The D3522 can be configured with different power sources.
Kubota Water-Cooled Diesel
The Kubota water-cooled diesel option provides a diesel-powered configuration for suitable construction applications.
24 HP Honda Gasoline Engine
The 24 HP Honda gasoline engine provides an alternative power configuration where gasoline-powered equipment is appropriate.
10 HP Electric Motor
A 10 HP electric motor is available for job sites with a suitable electrical supply.
Trailer or Skid-Mounted Configuration
The D3522 can be configured according to transportation and job-site requirements.
Trailer-mounted: The trailer configuration uses a single 6,000 lb. capacity axle with electric braking and lights.
Skid-mounted: A lower-profile skid configuration is available with forklift tubing for suitable material-handling requirements.
This flexibility allows contractors to select a configuration appropriate for their operating environment.
Optional D3522 Equipment
Available options include:
Hydraulic receiving hopper agitator
Pendant or wireless remote
Spare tire mount
Skid mounting with forklift tubing
Hydraulic pressure washer
Mounted air compressor
These options can help contractors configure the D3522 for specific project requirements.
Choosing a Hydraulic Squeeze Pump for Grout
When evaluating a hydraulic squeeze pump for grout, consider the following factors:
Material compatibility – Confirm the grout is suitable for the pump.
Material consistency – Check the material's pumping characteristics.
Aggregate size – Verify compatibility with the pumping system.
Required output – Determine the desired cubic yards per hour.
Pumping distance – Consider hose length and job-site layout.
Power availability – Select diesel, gasoline, or electric power.
Mounting configuration – Choose trailer or skid mounting.
Accessories – Determine whether an agitator, remote, or other option is required.
Choosing a 2-Inch Pump for Plaster and Stucco
For plaster and stucco projects, contractors should evaluate the material specification, required output, hose configuration, pumping distance, and site access.
The D3522's 2-inch discharge and variable-speed operation make it a compact option for suitable applications, subject to material compatibility and operating requirements.
D3522 for Construction and Repair Projects
The D3522 combines a compact design with variable-speed pumping and multiple configuration options. Its intended applications include suitable concrete repair, epoxy, block fill, plaster, and stucco work.
With 0–6 cubic yards per hour output, 400 PSI pumping pressure, and a 6 cubic foot receiving hopper, the D3522 can be evaluated for projects requiring a compact hydraulic squeeze pumping system.
Hydraulic Squeeze Pump for Grout: D3522 2-Inch Pump for Plaster and Stucco
