Efficient material delivery is essential for gunite and shotcrete contractors working on construction, repair, and rehabilitation projects. The Blastcrete H 020 Gunite Machine Attachment is a hydraulic rotary gunite machine designed with variable-speed operation, precise material output control, and a compact skid-mounted configuration.
For contractors searching for a Skid Mounted Gunite Machine or Rotary Gunite Machine, the H 020 provides a practical attachment that can operate with a compatible hydraulic power unit.
Blastcrete H 020 Gunite Machine Attachment
The Blastcrete Model H 020 is a hydraulic rotary gunite machine attachment with an output range of 0–5 cubic yards per hour. Its Genuine Piccola single-point clamping system is designed to provide reliable rotor clamping while allowing precise control of material output.
The hydraulic requirement is 10 GPM at 1,500 PSI, making the attachment compatible with any hydraulic power unit capable of supplying these requirements. Because the machine is hydraulically powered, its minimum air requirement is 225 CFM.
Request a Quote for the H 020
Download the H 020 Brochure
Features of the Skid Mounted Gunite Machine
The H 020 includes several features intended to support efficient operation and jobsite handling:
Genuine Piccola Single-Point Clamping System
Precise Material Output Control
Universal Mounting Plate
Forklift Pickup Tubing
Rotor of Your Choice
Variable output from 0–5 cubic yards per hour
Rotary Gunite Machine Specifications
Specification H 020
Air Requirement 225 CFM minimum
Output 0–5 cubic yards per hour
Outlet 1.5 inches
Maximum Aggregate ¾ inch
Mounting Skid mount
Hydraulic Requirement 10 GPM @ 1,500 PSI
Estimated Wear Pad Life 200 tons
Dimensions 34" × 34" × 50"
Weight 1,250 lbs.
Hydraulic Power for Gunite Applications
The H 020 uses hydraulic power rather than a dedicated engine incorporated into the attachment. A compatible hydraulic power unit supplying 10 GPM at 1,500 PSI can be used to operate the machine.
This arrangement can provide flexibility for contractors who already have suitable hydraulic equipment available. The hydraulic configuration also contributes to the machine's relatively low minimum air requirement of 225 CFM.
Precise Material Output
The variable-speed capability allows the H 020 to operate from 0 to 5 cubic yards per hour. This gives operators the ability to adjust material delivery according to project requirements and working conditions.
For contractors using a Rotary Gunite Machine, controllable output can help maintain an appropriate material flow while performing suitable gunite and shotcrete applications.
Compact Skid-Mounted Design
The H 020 measures 34 × 34 × 50 inches and weighs approximately 1,250 pounds. Its skid-mounted configuration and forklift pickup tubing are designed to facilitate equipment handling and positioning.
The universal mounting plate provides additional installation flexibility when integrating the Gunite Machine Attachment with compatible equipment.
Applications
The H 020 is designed for appropriate gunite and dry-mix material applications. Depending on project specifications and material requirements, the machine can be considered for applications involving:
Gunite work
Suitable shotcrete applications
Concrete repair
Concrete rehabilitation
Construction material spraying
Other compatible dry-mix applications
The maximum aggregate specification is ¾ inch, and contractors should verify material compatibility before beginning a project.
Benefits of the H 020 Gunite Machine Attachment
When comparing a Skid Mounted Gunite Machine, contractors can evaluate the H 020 based on its:
0–5 cubic-yard-per-hour variable output
Hydraulic operation
10 GPM @ 1,500 PSI hydraulic requirement
225 CFM minimum air requirement
Compact skid-mounted configuration
Universal mounting plate
Forklift pickup tubing
Precise material output control
Genuine Piccola single-point clamping system
Skid Mounted Gunite Machine: Rotary Gunite Machine for Professional Applications
