Looking for reliable pump cast refractory equipment for demanding industrial applications? The Blastcrete MX-10 Mixer/Pump is a specialized mixing and pumping system designed for dense refractory shotcrete and pump-cast installations. Combining a high-torque hydraulic pan mixer with a 3-inch ultra-high-pressure swing tube piston pump, the MX-10 provides an integrated solution for preparing and delivering refractory materials in challenging industrial environments.
Since 1996, the MX-10 has been an established choice for monolithic refractory installations. With a specified pumping pressure of 2,200 PSI and a stated material delivery capacity of up to 10 tons per hour, this equipment is designed to support demanding refractory placement projects.
The MX-10 is also commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet, depending on material properties, pipeline configuration, and operating conditions. Its swing-out receiving hopper provides convenient access to the lower hopper and swing tube section for cleaning and maintenance.
Request a Quote or Download the Brochure to learn more about the Blastcrete MX-10 and its capabilities for industrial refractory installation.
What Is Pump Cast Refractory Equipment?
Pump cast refractory equipment is used to mix and deliver suitable refractory castables to installation areas through a pumping system. This process can help contractors place refractory materials in industrial furnaces, kilns, boilers, and other high-temperature processing equipment.
The Blastcrete MX-10 combines mixing and pumping functions in one machine. Its high-torque hydraulic pan mixer prepares compatible refractory materials, while its ultra-high-pressure piston pump delivers the material through a suitable pumping line.
For contractors looking for dependable pump cast refractory equipment, the MX-10 offers a specialized configuration designed for demanding refractory shotcrete and pump-cast applications.
Key Features of the Blastcrete MX-10
1. Ultra-High-Pressure Piston Pump
The MX-10 features a 3-inch × 24-inch ultra-high-pressure swing tube piston pump with a specified pumping pressure of 2,200 PSI.
This pumping system is designed for demanding refractory pump-cast and shotcrete applications where compatible materials must be transported through a suitable delivery line.
Its high-pressure configuration supports industrial installation work involving dense refractory materials and extended pumping distances.
2. High-Torque Hydraulic Pan Mixer
The MX-10 includes a hydraulic pan mixer with a capacity of 2,200 pounds.
The mixer has a stated mixing time of approximately 1.5 to 2 minutes, helping prepare suitable refractory materials for pumping and placement.
Consistent mixing is essential for achieving the material characteristics required by the installation process. Operators should follow the refractory manufacturer's recommended mixing procedures.
3. High Material Output Capacity
The MX-10 is designed to deliver up to 10 tons of refractory material per hour under suitable operating conditions.
Its technical specifications also list a volumetric output range of 0–12 cubic yards per hour. Actual production depends on material density, mix formulation, pipeline configuration, and operating conditions.
This capacity makes the MX-10 worth evaluating for industrial refractory projects requiring substantial material placement.
4. Vertical Pumping Capability
The MX-10 is commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet.
This capability can support installations where refractory materials must reach elevated or difficult-to-access locations in industrial facilities.
Actual pumping distance depends on material properties, pipeline diameter and layout, elevation, and job-site conditions.
5. Swing-Out Receiving Hopper
The MX-10 features a swing-out receiving hopper with a stated capacity of 2,500 pounds and a hydraulic agitator.
The swing-out design provides convenient access to the lower hopper and swing tube section for cleaning and maintenance. Forklift tubing mounted to the lower hopper also facilitates flat-pack removal.
These features support equipment servicing and handling when performed according to the manufacturer's procedures.
6. Integrated Water Measurement System
The machine includes a Fill-Rite water meter and a 20-gauge dousing bucket for fast water introduction.
These components support water measurement and material preparation. Water addition should follow the refractory manufacturer's recommended mix design to maintain the required material properties.
7. Reliable Electronic Controls
The MX-10 features solid-state electronics and solid-state valve control. CE certification is also listed among its features.
Confirm the applicable certification documentation and electrical requirements for your intended operating location before purchasing the machine.
Applications of Pump Cast Refractory Equipment
Industrial Furnace Linings
Industrial furnaces require refractory linings capable of withstanding high temperatures and demanding operating conditions. The MX-10 is designed to mix and pump compatible refractory materials for monolithic installation projects.
Cement Kilns and Industrial Kilns
Cement kilns and other industrial kilns depend on suitable refractory linings to protect internal surfaces from heat and process conditions. The MX-10 can support compatible refractory pump-cast and shotcrete installation work.
Boilers and Thermal Processing Systems
Boilers and thermal processing facilities may require refractory installation, repair, or replacement. The MX-10 provides an integrated mixing and pumping configuration for compatible refractory materials used in these applications.
Dense Refractory Shotcrete
Dense refractory shotcrete applications require suitable material preparation and reliable delivery to the placement area. The MX-10 combines a high-torque mixer with a high-pressure piston pump to support these demanding operations.
Monolithic Refractory Installation
Monolithic refractory systems are installed as a continuous lining rather than assembled from individual prefabricated shapes. The MX-10 is designed to support suitable refractory installation methods that require mixing and
Pump Cast Refractory Equipment Blastcrete MX-10 Mixer/Pump
