Looking for a reliable 2200 PSI refractory pump for demanding industrial applications? The Blastcrete MX-10 Mixer/Pump is a high-performance mixing and pumping system designed for dense refractory shotcrete and pump-cast installations. Combining a 3-inch ultra-high-pressure swing tube piston pump with a high-torque hydraulic pan mixer, the MX-10 offers an integrated solution for challenging refractory placement projects.
Since 1996, the MX-10 has been an established choice for monolithic refractory installations. Its 2,200 PSI piston face pressure, substantial mixing capacity, and rugged design make it suitable for demanding industrial environments where dependable material preparation and delivery are essential.
The MX-10 is designed to deliver up to 10 tons of material per hour and is commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet, depending on material properties, pipeline configuration, and operating conditions.
Request a Quote or Download the Brochure to learn more about the Blastcrete MX-10 and its capabilities.
What Is a 2200 PSI Refractory Pump?
A 2200 PSI refractory pump is designed to deliver compatible refractory materials under high-pressure conditions for specialized industrial installation work. The Blastcrete MX-10 combines a high-pressure piston pump with an integrated hydraulic pan mixer to support refractory shotcrete and pump-cast applications.
Its 3-inch × 24-inch swing tube piston pump is designed for demanding material placement requirements, while the high-torque mixer prepares refractory materials before pumping.
For industrial contractors, this integrated configuration can simplify material preparation and delivery when installing monolithic refractory linings in furnaces, kilns, and other industrial facilities.
Key Features of the Blastcrete MX-10 Refractory Pump
1. Ultra-High-Pressure Pumping System
The Blastcrete MX-10 features a 3-inch × 24-inch ultra-high-pressure swing tube piston pump with a specified piston face pressure of 2,200 PSI.
This system is designed for demanding refractory shotcrete and pump-cast applications involving compatible dense materials. Its high-pressure pumping capability supports material delivery through an appropriately configured pumping line.
2. High-Torque Hydraulic Pan Mixer
The MX-10 incorporates a hydraulic pan mixer with a capacity of 2,200 pounds and a stated mixing time of approximately 1.5 to 2 minutes.
The mixer helps prepare refractory materials for pumping and placement. Following the material manufacturer's recommended mix design and mixing procedure is important for achieving the required consistency and performance.
3. High Material Output
The MX-10 is designed to deliver up to 10 tons of material per hour. Its listed volumetric output range is 0–12 cubic yards per hour.
Actual production depends on material density, mix formulation, pumping distance, and operating conditions. Contractors should assess their production requirements before selecting a machine configuration.
4. Extended Vertical Pumping Capability
The MX-10 is commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet.
This capability can be valuable for industrial installations where materials must reach elevated or difficult-to-access locations. Actual performance depends on material properties, pipeline layout, elevation, and other job-site conditions.
5. Swing-Out Receiving Hopper
The MX-10 includes a 2,500-pound-capacity swing-out receiving hopper with a hydraulic agitator.
Its swing-out design provides convenient access to the lower hopper and swing tube section for cleaning and maintenance. Forklift tubing mounted on the lower hopper also facilitates flat-pack removal and handling.
6. Water Measurement and Material Preparation
The machine features a Fill-Rite water meter and a 20-gauge dousing bucket for fast water introduction.
These components support material preparation and water measurement. Operators should follow the refractory material manufacturer's instructions to maintain the specified mix properties.
7. Reliable Electronic Controls
The MX-10 uses solid-state electronics and solid-state valve control. CE certification is also listed among its features.
Confirm the applicable certification documentation and electrical requirements with the supplier before purchasing equipment for a specific operating location.
Applications of a 2200 PSI Refractory Pump
Refractory Shotcrete Installation
Refractory shotcrete is used to apply specialized heat-resistant materials to industrial surfaces. The MX-10 combines mixing and high-pressure pumping to support compatible refractory shotcrete installation methods.
Refractory Pump-Cast Applications
Pump-cast refractory work requires suitable materials to be mixed and transported to the placement area. The MX-10's hydraulic pan mixer and piston pump are designed to support these demanding installation operations.
Industrial Furnace Linings
Furnaces operate under high-temperature conditions that require suitable refractory protection. The MX-10 can support compatible monolithic refractory installation work in industrial furnace applications.
Cement Kilns and Industrial Kilns
Cement kilns and other industrial kilns use refractory linings to protect internal surfaces from heat and process conditions. The MX-10 is designed to help contractors mix and deliver suitable refractory materials for these projects.
Boilers and Thermal Processing Facilities
Industrial boilers and thermal processing facilities may require refractory installation, repair, or replacement. The MX-10 provides an integrated mixing and pumping solution for compatible refractory materials used in these environments.
Technical Specifications of the Blastcrete MX-10
Specification Details
Equipment model MX-10 Mixer/Pump
Pump type 3" × 24" ultra-high-pressure swing tube
Pump pressure 2,200 PSI piston face pressure
Mixer type Hydraulic high-torque pan mixer
Mixer capacity 2,200 lbs
Mixing time Approximately 1.5–2 minutes
Output 0–12 cubic yards per hour
Stated material delivery capacity Up to 10 tons per hour
Discharge 3 inches
Receiving hopper 2,500 lbs, swing-out design with hydraulic agitator
Operating platform 22 sq. ft.
Crane pickup Central four-point pickup; no spreader bar required
Electrical controls Solid-state valve control
Trailer Dual 6,000 lb-capacity axles with electric braking and lights
Dimensions 204" × 88" × 117"
Weight 9,000 lbs
Power Options for the MX-10
The Blastcrete MX-10 is available with several power configurations to suit different industrial job-site requirements.
John Deere diesel engine: 4045T, 99 HP, water-cooled diesel.
Deutz diesel engine: BF4M 2012, 102 HP, water-cooled diesel.
Electric power: Dual 40 HP electric motors.
The best option depends on site infrastructure, electrical availability, project requirements, and operating conditions. Confirm the selected configuration and power requirements with the equipment supplier.
Optional Accessories
The MX-10 can be configured with optional accessories to support particular operating and maintenance needs.
2,000 PSI hydraulic pressure washer: Supports equipment cleaning and maintenance.
Vogel automatic lubrication system: Provides an optional automated lubrication arrangement.
Mounted spare tire: Adds a spare tire to the equipment configuration.
Pendant or wireless remote control: Offers alternative machine-control arrangements.
Skid mounting with forklift tubing: Provides an alternative mounting and handling configuration.
Contact the supplier to confirm accessory availability and compatibility with the selected machine.
Benefits of Choosing the Blastcrete MX-10
Selecting the right refractory pumping equipment is important for managing demanding industrial installation work. The MX-10 offers several practical advantages:
High-pressure performance: Specified piston face pressure of 2,200 PSI.
Integrated mixing and pumping: Combines material preparation and delivery in one machine.
Substantial mixing capacity: Features a 2,200-pound hydraulic pan mixer.
Industrial versatility: Designed for refractory shotcrete and pump-cast applications.
Extended vertical delivery: Commonly used for suitable refractory materials over 300 feet vertically.
Convenient maintenance access: Features a swing-out receiving hopper.
Multiple power configurations: Available with diesel engines or dual electric motors.
Optional remote controls: Pendant and wireless remote options are available.
Actual pumping performance and production rates depend on material properties, pipeline setup, and job-site conditions.
Why Choose the Blastcrete MX-10 Mixer/Pump?
For contractors searching for a dependable 2200 PSI refractory pump, the Blastcrete MX-10 combines a high-pressure piston pump and high-torque hydraulic pan mixer in one integrated system.
Its design supports demanding refractory shotcrete and pump-cast applications, while its range of power options and maintenance-access features offers flexibility for different industrial projects.
Before purchasing, verify material compatibility, required production capacity, pumping distance, available power, and site access with the supplier.
Request a Quote for the Blastcrete MX-10
Are you looking for high-pressure refractory pumping equipment for your next industrial project?
Explore the Blastcrete MX-10 Mixer/Pump to learn more about its 2,200 PSI piston face pressure, integrated mixing capabilities, power configurations, and optional accessories.
Request a Quote to discuss pricing, availability, and machine configurations.
Download the Brochure to review product features and technical specifications.
Choose a specialized mixing and pumping solution designed for demanding industrial refractory installation requirements.
Frequently Asked Questions
1. What is a 2200 PSI refractory pump?
A 2200 PSI refractory pump is equipment specified to develop a pressure of 2,200 pounds per square inch at the relevant pumping or piston face measurement. The Blastcrete MX-10 uses a 3-inch × 24-inch ultra-high-pressure swing tube piston pump for refractory applications.
2. What is the pumping pressure of the MX-10?
The MX-10 has a specified piston face pressure of 2,200 PSI.
3. What is the output capacity of the MX-10?
The listed volumetric output range is 0–12 cubic yards per hour, with a stated material delivery capacity of up to 10 tons per hour. Actual output depends on material density and operating conditions.
4. Can the MX-10 pump refractory materials vertically over 300 feet?
Yes. The MX-10 is commonly used to pump suitable refractory materials over vertical distances exceeding 300 feet. Actual performance depends on material characteristics, pipeline layout, and job-site conditions.
5. What is the mixer capacity?
The MX-10 features a 2,200-pound-capacity hydraulic pan mixer with a stated mixing time of approximately 1.5 to 2 minutes.
6. Which power options are available?
Available configurations include a 99 HP John Deere diesel engine, a 102 HP Deutz diesel engine, and dual 40 HP electric motors.
7. Does the MX-10 support remote control?
Yes. Pendant and wireless remote controls are available as optional configurations.
8. How can I request a quote or download the brochure?
Contact the equipment supplier to discuss your application, confirm the appropriate machine configuration, obtain pricing information, and request the MX-10 brochure.
2200 PSI Refractory Pump Blastcrete MX-10 Mixer/Pump for Industrial Applications
