Hot epoxy grouting applications require pumping equipment that can provide controlled material delivery, suitable pressure, and dependable operation. The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors who already own compatible hydraulic power units.
The D3522 is a hydraulic powered hot epoxy grout pump that provides variable-speed pumping from 0 to 6 cubic yards per hour and delivers up to 400 PSI pumping pressure. Its 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, and long-lasting pumping tubes provide a practical configuration for compatible professional grouting applications.
What Is the D3522 Attachment?
The D3522 Attachment is a hydraulic-powered pumping solution developed for contractors working with hot epoxy grout.
The attachment can be coupled to a compatible hydraulic power unit, making it suitable for contractors who already have hydraulic power equipment available.
Its main features include:
2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
Variable-speed pumping
0–6 cubic yards per hour output
Up to 400 PSI pumping pressure
Long-lasting pumping tubes
Hydraulic requirement of 10 GPM at 3,000 PSI
Hydraulic Powered Hot Epoxy Grout Pump
A hydraulic powered hot epoxy grout pump can provide contractors with a practical way to pump compatible epoxy grout using hydraulic power.
The D3522 is specifically designed for hot epoxy grouting contractors who have compatible hydraulic power units. Its variable-speed operation allows material delivery to be adjusted within the pump's rated output range.
The equipment should always be operated according to the manufacturer's specifications and the requirements of the grout material being used.
Variable-Speed Pumping From 0–6 Cubic Yards Per Hour
The D3522 provides variable-speed pumping with an output capacity of:
0–6 cubic yards per hour
This variable output allows contractors to adjust material delivery according to project requirements and within the pump's rated capacity.
The appropriate flow rate should be determined based on the grout manufacturer's recommendations, material characteristics, and specific jobsite conditions.
Up to 400 PSI Pumping Pressure
The D3522 provides pumping pressure of up to:
400 PSI
This pressure capability is intended for compatible professional hot epoxy grouting applications.
The maximum rated pressure should not be assumed to be the correct operating pressure for every project. Contractors should follow the material manufacturer's instructions and determine the appropriate pressure for the application.
2-Inch Hydraulic Squeeze Pump
The D3522 incorporates a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.
The squeeze-pump design provides a straightforward material-pumping system for compatible epoxy grout applications.
For contractors evaluating hydraulic-powered epoxy pumping equipment, the 2-inch pump configuration is an important specification when matching equipment to project requirements.
Heavy-Duty Planetary Gearbox
A heavy-duty planetary gearbox drives the D3522 hydraulic squeeze pump.
The gearbox provides the mechanical drive needed for pumping and contributes to the equipment's heavy-duty configuration.
The combination of hydraulic power, planetary gearing, and squeeze-pump operation makes the D3522 suitable for professional hot epoxy grouting applications when properly matched to the material and hydraulic power source.
Epoxy Material Does Not Contact Moving Parts
A key design characteristic of the D3522 is that epoxy material does not come into contact with the moving parts of the pump.
This separates the pumped material from the pump's moving mechanical components.
For contractors considering a hydraulic powered hot epoxy grout pump, this feature can be an important factor when comparing different pumping-system designs and maintenance considerations.
Long-Lasting Pumping Tubes
The D3522 features long-lasting pumping tubes designed for professional pumping applications.
Pumping tubes are an important part of squeeze-pump systems because they participate directly in material delivery.
Contractors performing regular hot epoxy grouting can consider pumping-tube durability when selecting equipment for ongoing work.
Hydraulic Power Requirements
The D3522 is designed to operate with a compatible hydraulic power unit meeting the following requirement:
10 GPM @ 3,000 PSI
Contractors should verify their existing hydraulic power unit before connecting the attachment.
Confirming hydraulic compatibility helps ensure that the power source meets the equipment's specified flow and pressure requirements.
D3522 Attachment Specifications
Specification D3522 Attachment
Pump Type 2" Hydraulic Squeeze Pump
Drive System Heavy-Duty Planetary Gearbox
Output Capacity 0–6 cubic yards per hour
Maximum Pumping Pressure Up to 400 PSI
Hydraulic Oil Requirement 10 GPM @ 3,000 PSI
Length 76"
Width 37"
Height 39"
Hopper Charging Height 28"
Applications for Hot Epoxy Grouting
The D3522 is designed for hot epoxy grouting contractors. Depending on material compatibility and project requirements, potential applications include:
Hot epoxy grouting
Industrial epoxy grouting
Structural grouting
Concrete repair
Concrete crack repair
Construction grouting
Industrial maintenance
Heavy-duty epoxy pumping
Professional grout pumping
Contractors should verify material compatibility and application suitability before operating the equipment.
Benefits of a Hydraulic Powered Hot Epoxy Grout Pump
Hydraulic Operation
The D3522 is designed to work with a compatible hydraulic power unit, making it useful for contractors who already have hydraulic equipment.
Variable-Speed Control
The pump provides output from 0–6 cubic yards per hour, allowing the material flow to be adjusted within its rated capacity.
400 PSI Pressure Capability
The D3522 provides up to 400 PSI pumping pressure for compatible applications.
Simple 2-Inch Pump Design
The 2-inch hydraulic squeeze pump provides a straightforward material-delivery configuration.
Heavy-Duty Gearbox
The planetary gearbox provides the mechanical drive required by the squeeze pump.
Long-Lasting Pumping Tubes
The D3522 incorporates long-lasting pumping tubes for professional pumping applications.
Separation of Epoxy From Moving Parts
Epoxy material does not come into contact with the moving parts of the pump.
How to Choose a Hydraulic Powered Hot Epoxy Grout Pump
When selecting a hydraulic powered hot epoxy grout pump, contractors should evaluate several factors.
Required Pumping Rate
Compare the project's required material flow with the D3522's 0–6 cubic yards per hour output range.
Required Pressure
Determine whether the application requires pressure within the D3522's maximum capability of 400 PSI.
Hydraulic Power Compatibility
Verify that the available hydraulic power unit can supply 10 GPM at 3,000 PSI.
Material Compatibility
Confirm that the hot epoxy grout material is compatible with the pumping system and suitable for the intended application.
Equipment Dimensions
Consider the physical dimensions of the D3522 when planning transportation, jobsite access, and equipment placement.
D3522 Dimensions
The D3522 Attachment measures:
Length: 76 inches
Width: 37 inches
Height: 39 inches
Hopper charging height: 28 inches
These measurements can help contractors plan transportation and jobsite positioning.
Why Consider the D3522 Attachment?
The D3522 offers an attachment-based pumping solution for contractors who already own compatible hydraulic power units.
Its combination of variable-speed pumping, up to 400 PSI pressure capability, a 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, and long-lasting pumping tubes provides a practical configuration for compatible hot epoxy grouting applications.
The design that keeps epoxy material away from moving pump components is another consideration for contractors evaluating professional epoxy pumping equipment.
D3522 for Hot Epoxy Grouting Contractors
For contractors searching for a hydraulic powered hot epoxy grout pump, the D3522 provides a combination of adjustable output, hydraulic operation, and professional-duty pumping components.
Key specifications include:
Pump Type: 2-inch hydraulic squeeze pump
Output Capacity: 0–6 cubic yards per hour
Maximum Pumping Pressure: Up to 400 PSI
Drive System: Heavy-duty planetary gearbox
Hydraulic Requirement: 10 GPM @ 3,000 PSI
For pricing and product information, visit the Quote Now page.
For additional product information, you can download the D3522-A brochure.
Conclusion
The Blastcrete D3522 Attachment is designed for hot epoxy grouting contractors who already have compatible hydraulic power units.
As a hydraulic powered hot epoxy grout pump, the D3522 provides variable-speed output from 0–6 cubic yards per hour and pumping pressure of up to 400 PSI.
Its 2-inch hydraulic squeeze pump, heavy-duty planetary gearbox, long-lasting pumping tubes, and design that prevents epoxy material from contacting moving pump components provide a practical configuration for compatible professional grouting applications.
Before purchasing or operating the D3522, contractors should verify hydraulic compatibility and confirm that the equipment's pressure, output capacity, material compatibility, dimensions, and application requirements meet the needs of the specific project.
Hydraulic Powered Hot Epoxy Grout Pump: D3522 Attachment
