Hydraulic Powered Concrete Pump: Trailer Mounted D3522 Pump for Construction Applications

The D3522 Pump is a compact 2-inch hydraulic squeeze pump designed for suitable concrete repair, epoxy, block fill, plaster, and stucco applications. With variable output from 0–6 cubic yards per hour and pumping pressure up to 400 PSI, the D3522 provides controlled material pumping in a compact package.

For contractors looking for a hydraulic powered concrete pump or a trailer mounted concrete pump, the D3522 offers multiple power and mounting configurations to suit different job-site requirements.

What Is a Hydraulic Powered Concrete Pump?

A hydraulic-powered pumping system uses hydraulic power to operate the pumping mechanism. The D3522 uses a 2-inch hydraulic squeeze pump driven by a heavy-duty planetary gearbox.

This configuration is designed for controlled pumping of compatible construction and repair materials.

The D3522 features variable output, allowing operators to adjust the pumping rate between 0 and 6 cubic yards per hour.

D3522 Trailer Mounted Concrete Pump

The D3522 can be configured as a trailer mounted concrete pump, providing a mobile equipment solution for contractors who need to transport the pump between job sites.

The supplied trailer specification includes:

Single 6,000 lb. capacity axle
Electric braking
Trailer lights

The trailer configuration can be useful for contractors who require equipment mobility while maintaining the pumping capabilities of the D3522.

D3522 Pumping Performance

The D3522 provides:

0–6 cubic yards per hour output
400 PSI pumping pressure
2-inch HD discharge
6 cubic foot receiving hopper

The variable-speed operation allows the material delivery rate to be adjusted according to the application and operating requirements.

Actual performance can vary depending on material characteristics, hose configuration, pumping conditions, and other factors.

D3522 Applications

The D3522 is designed for several applications involving compatible materials.

Concrete Repair

The D3522 can be used for suitable concrete repair materials where controlled pumping is required.

Block Fill

The pump can support compatible block fill applications in masonry and construction.

Epoxy

The D3522 can be used for suitable epoxy applications when the material is compatible with the pumping system.

Plaster and Stucco

The machine is also designed for various plaster and stucco applications.

Always confirm material compatibility before pumping a particular product.

D3522 Hydraulic Pump Features

The D3522 includes several features designed for construction and repair applications:

2-inch hydraulic squeeze pump
Heavy-duty planetary gearbox
6 cubic foot receiving hopper
Variable output from 0–6 cubic yards per hour
400 PSI pumping pressure
2-inch HD discharge
Trailer-mounted configuration
Lower-profile skid-mounted configuration
Multiple power options
D3522 Pump Specifications
Specification Details
Pump 2" D3522 Hydraulic Squeeze Pump
Pumping Pressure 400 PSI
Output 0–6 Cubic Yards Per Hour
Discharge 2" HD
Hopper 6 cu. ft.
Trailer Single 6,000 lb. capacity axle with electric braking and lights
Dimensions 166" × 88" × 54"
Weight 2,800 lbs.
D3522 Power Options

The D3522 can be configured with three power options.

Kubota Water-Cooled Diesel

The Kubota water-cooled diesel option provides a diesel-powered configuration for suitable job-site applications.

24 HP Honda Gasoline Engine

The 24 HP Honda gasoline engine provides a gasoline-powered alternative.

10 HP Electric Motor

The 10 HP electric motor provides an option for locations with an appropriate electrical power supply.

The appropriate configuration depends on the job-site environment, available power, mobility requirements, and application.

Trailer Mounted vs. Skid Mounted D3522

The D3522 offers two primary mounting configurations.

Trailer Mounted

The trailer mounted concrete pump configuration is designed for mobility. Contractors can transport the equipment between suitable job sites using the trailer configuration.

Skid Mounted

The lower-profile skid-mounted configuration can be selected where trailer mounting is not preferred. The skid-mounted version can include forklift tubing for equipment handling.

D3522 Optional Equipment

The D3522 can also be configured with additional options, including:

Hydraulic receiving hopper agitator
Pendant or wireless remote
Spare tire mounted
Skid mounted with forklift tubing
Hydraulic pressure washer
Air compressor mounted

These options allow the equipment to be configured around different project requirements.

Benefits of a Hydraulic Powered Concrete Pump

A hydraulic-powered pumping system can provide controlled operation for suitable construction applications.

The D3522 combines hydraulic pumping with:

Variable-speed output
2-inch discharge
400 PSI pumping pressure
6 cubic foot receiving hopper
Multiple power configurations
Trailer or skid mounting
Optional remote control and accessories

This combination makes the D3522 an option for contractors who need compact pumping equipment for compatible materials.

Choosing a Trailer Mounted Concrete Pump

Before purchasing a trailer mounted concrete pump, contractors should consider:

Application – Identify the materials and work being performed.
Material compatibility – Confirm that the material is suitable for the D3522.
Required output – Determine the desired pumping rate.
Power source – Select diesel, gasoline, or electric power.
Mobility – Consider transportation between job sites.
Mounting configuration – Compare trailer and skid options.
Accessories – Determine whether additional equipment is required.
Job-site conditions – Consider access, positioning, and operating requirements.
D3522 for Mobile Construction Applications

The D3522 provides a compact hydraulic pumping solution with the flexibility of a trailer-mounted configuration.

Its 0–6 cubic yards per hour variable output, 400 PSI pumping pressure, 6 cubic foot hopper, and 2-inch discharge make it suitable for evaluating a range of compatible concrete repair, block fill, epoxy, plaster, and stucco applications.

For contractors searching for a hydraulic powered concrete pump or trailer mounted concrete pump, the D3522 can be selected according to the project's material, power requirements, mobility needs, and job-site conditions.