Only Vac-Con combines the flexibility of a two-engine design to get the toughest jobs done right. Our efficient design, allowing the chassis engine to drive either the 3-stage fan or positive displacement blower vacuum system, actually saves you fuel and general wear and tear in the long run. Using a standard hydrostatic drive, this design can engage the industry’s most powerful vacuum. Offering a wide array of options, this is truly a “go anywhere, do anything” machine.
Available in:
Vacuum System (as specified by Model Number)
3/16" Corten® Steel Debris Tank - (size as specified by model number)
Full opening rear door
Hydraulic rear door locks, with door grabber and safety latch
5” (127mm) Butterfly valve with 10’ (3.05m) layflat hose
Debris tank dumping: minimum 50°, hydraulic scissors lift - power up/power down
Polyethylene water tank
Automatic Vacuum Breaker and overfill protection
8” (203.2mm) vacuum intake hose
Boom travel tie down
4 Way hydraulic boom with 270° rotation and joystick controls
Front mounted 600' (182.88m) capacity 1" (25.4mm) hose / hydraulic hose reel
60 GPM (227.13 LPM) / 2000 PSI (137.89 bar) water pump system
Water pump drive: Standard Aux Engine is WSG-1068 6.8 Liter, 10-Cylinder, Gas Engine 222hp @ 3200 RPM
400’ high pressure jet rodder hose (1” or 3/4”)
Manual hose rewind guide
Hose guide (Tiger Tail)
30" (762mm) leader hose
20 GPM (75.7 LPM) at 600 PSI (40 bar) wash down hand gun with 25’ (7.62m) of hose and nozzle
Sealed and locking tool box(es) {as indicated by model number}
1) each sanitary and penetrator nozzles
20.5' aluminum intake pipe(1-3', 1-5', 1-6', and 1-6.5' nozzle)
ICC lighting
